What is your latest acquisition?

drummermitchell · « **Reply #1180 on:** 23 May 2013, 12:23 am »

Correct,replace the U jumpers and 1ohm resistors(which I have on now)on the tweets,as I bought the 3.7's(6months old),Didn't have a second set of U jumpers. read some reviews on the Empirical jumpers and they seem real promising,some prefer them over the Cardas jumpers.
Price is right and if they open up the 7's more then were good.
I must say what the maggies do for bottom end(kick drum)is just like being in a sound booth with a world class engineer,superb sound,
let alone the midrange.To bad my room wasn't a lot bigger,they still sound excellent

.

James Tanner · « **Reply #1181 on:** 23 May 2013, 12:09 pm »

My new Thorens TD 350 turntable with Rega tonearm and Ortofon Cadenza Red MC Cartridge in demo room 3.

james

PRELUDE · « **Reply #1182 on:** 23 May 2013, 09:38 pm »

Quote from: James Tanner on 23 May 2013, 12:09 pm

My new Thorens TD 350 turntable with Rega tonearm and Ortofon Cadenza Red MC Cartridge in demo room 3.

james

James,
Can you let me rest for a while please? I have been spending for last two months like crazy, now you got one I want one too.

Congratulation on your awesome set up.

alexone · « **Reply #1183 on:** 24 May 2013, 06:21 pm »

James,

did you ever try to get your vinyls recorded to hdd? if yes...how do you do it and what is your preferred resolution??

thanks,

al.

James Tanner · « **Reply #1184 on:** 24 May 2013, 06:24 pm »

Quote from: alexone on 24 May 2013, 06:21 pm

James,

did you ever try to get your vinyls recorded to hdd? if yes...how do you do it and what is your preferred resolution??

thanks,

al.

Hi al - no sorry have not gone there yet.

james

Robert D · « **Reply #1185 on:** 21 Jun 2013, 11:29 am »

http://www.amazon.ca/GM550-Non-contact-Infrared-Digital-Thermometer/dp/B007Q87J3U

GM550 Non-contact IR Infrared Digital Thermometer - Measurement Range: Between -50 °C and 550 °C (Between -58 °F and 1022 °F): Amazon.ca: Tools & Building Supplies

Best purchase that I have done in a long Time
A must for every Home !
Works like a charm
Robert

Diamond Dog · « **Reply #1186 on:** 23 Jun 2013, 01:52 am »

So now we wait...

D.D.

milford3 · « **Reply #1187 on:** 23 Jun 2013, 03:39 am »

The Schiit Lyr. It will change the way you listen to headphones.

bjski · « **Reply #1188 on:** 23 Jun 2013, 04:38 pm »

My system was all black at one time except for the preamp which is black and silver. When Bryston come's out with a new sound card in the BDP I'll then upgrade that to silver. (anyone want to swap a Silver BDP-1 for a black one? LOL)

alexone · « **Reply #1189 on:** 4 Jul 2013, 08:51 pm »

hi, folks!

just got a Ligawo HDMI audio switch (audio deembedder). this small device has one coax and one optical output for digital signals up to 192/24 (not sure if the optical out is limited to 96/24...have to check that). there is also a stereo out (minijack). however, the unit is housed in a metal body which makes it pretty sturdy

. the power supply is external. it was about 60 Euros - nice price

i recently purchased Rolling Stones GRRRR! album (blu ray audio). the recording is done in 96/24 but my player only gives out a 48khz signal (not sure about the 'bits' as the BDA-1 only shows the incoming khz-signal). having the player connected with the Ligawo the BDA-1 gets a 96khz signal

al.

drummermitchell · « **Reply #1190 on:** 5 Jul 2013, 01:01 am »

Just acquired MYE Stands for my 3.7's,now if my Vac pre and my 28's were here,I'd be some happy.

Freo-1 · « **Reply #1191 on:** 5 Jul 2013, 01:23 am »

A pair of ATC SCM-19 monitors from Flat Earth Audio (with matching stands from Tyler Acoustics). They are integrated with a SVS SB13 Ultra for a wonderful sounding reference setup for two channel .

budcook · « **Reply #1192 on:** 5 Jul 2013, 05:05 pm »

BP-26/MPS-2, Mye stands for Maggie 1.7's, Cardas Lightning 15 digital cable to connect my BCD-1 to BDA-2, Cardas balanced Clear Light cables to replace my Bryston pre-amp to amp cables, BIT IS-15 conditioner (on order).

Harpy · « **Reply #1193 on:** 5 Jul 2013, 05:18 pm »

Music PC with SOtM USB converter. PC running Win8 with JRivers. Remote is an IPhone with JRemote. Power supply is external.

yioryos · « **Reply #1194 on:** 5 Jul 2013, 09:35 pm »

Hi
I just bought the Emotiva XPR-2 for a second system. It is a nice amp.
George

turnovertherecord · « **Reply #1195 on:** 6 Jul 2013, 01:08 am »

oppo silver 105 for my first time digital playback

jimdgoulding · « **Reply #1196 on:** 6 Jul 2013, 01:09 am »

Got two, actually, a Shelter 501 MkII MC phono cartridge and a Vista Audio Phono-1 MkII head amp which in the process of being built.

Samurai7595 · « **Reply #1197 on:** 6 Jul 2013, 05:23 pm »

Bryston 4B-SST² power amp and the all new ProAc Response D30R floorstanding speakers.

My new purchases should arrive in a few weeks.

FireGuy · « **Reply #1198 on:** 6 Jul 2013, 05:39 pm »

Very nice Samura, awesome...just curious, given the overwhelming press and extreme doting, why not Bryston loudspeakers?

jimdgoulding · « **Reply #1199 on:** 6 Jul 2013, 07:28 pm »

Quote from: Freo-1 on 5 Jul 2013, 01:23 am

A pair of ATC SCM-19 monitors from Flat Earth Audio (with matching stands from Tyler Acoustics). They are integrated with a SVS SB13 Ultra for a wonderful sounding reference setup for two channel .

Very nice. Love to match with a couple of Duke's subs in a larger room than I have.