[kbuzz3]

Anyone have any suggestions for high quality jacks that interface nicely with the tight vintage jack spacing?

[Sonny]

try these: http://www.amazon.com/Switchcraft-3502A-RCA-Plug-Nickel/dp/B001IYD2UW/ref=sr_1_sc_1?ie=UTF8&qid=1327468078&sr=8-1-spell

very good!

[TQdB]

+1 

Those are the exact part I was going to suggest. You'd have to go to Eichmann Bullets to -hear- anything better. They're nickle plated but that's not a big deal at line levels and the guts are a copper alloy. Depending on how much EMI you have, wire those up with a twisted pair or signal tape style http://www.soundstage.com/synergize/synergize021998.htm made from some 28 gauge magnet wire and enjoy them forever.

[Wayner]

The spacing on audio in and out pairs on my Revox has a center to center spacing of about 7/16" or about 11mm. That means the connector can't be any bigger in diameter then 11mm. 10mm would be better to give some space in between.....

Wayner

[gcos]

anyone know of an adapter which will allow you to use your normal interconnects?

[Sonny]

anyone know of an adapter which will allow you to use your normal interconnects?

Just solder two wires from your connector to the jack!