« previous next »
Pages: [1]   Go Down

Denon DL 103 and BP 1.5?

0 Members and 1 Guest are viewing this topic. Read 1189 times.

alexone

  • Full Member
  • Posts: 1983
  • Anthony Bower, Stan Rybbert, John Stoneborough
Denon DL 103 and BP 1.5?
« on: 2 Oct 2009, 10:40 am »
James,

the BP 1.5 standard gain of 22.5 db accomodates cartridges with outputs of LESS than 40 ohms impedance. the Denon DL103 has 40 ohms impedance. good idea to try this cartridge?


thanx,

al.
Logged

James Tanner

  • Facilitator
  • Posts: 20864
  • The Demo is Everything!
    • http://www.bryston.com
Re: Denon DL 103 and BP 1.5?
« Reply #1 on: 2 Oct 2009, 11:22 am »
Hi Al

No the Denon is higher than 40 ohms and the moving coil stage in the BP1.5 should be switched to the 16.5 gain setup.

james
Logged

alexone

  • Full Member
  • Posts: 1983
  • Anthony Bower, Stan Rybbert, John Stoneborough
Re: Denon DL 103 and BP 1.5?
« Reply #2 on: 9 Oct 2009, 09:11 am »
James,

the Ortofon mc-cartridge "Rondo Red" has the following specs:

...recommended load impedance: 10-200 ohm.

should the BP 1.5's adjustment (for this cartridge) be 16.5db OR 22.5db ? :scratch:



al.
Logged

James Tanner

  • Facilitator
  • Posts: 20864
  • The Demo is Everything!
    • http://www.bryston.com
Re: Denon DL 103 and BP 1.5?
« Reply #3 on: 9 Oct 2009, 11:04 am »
Quote from: alexone on  9 Oct 2009, 09:11 am
James,

the Ortofon mc-cartridge "Rondo Red" has the following specs:

...recommended load impedance: 10-200 ohm.

should the BP 1.5's adjustment (for this cartridge) be 16.5db OR 22.5db ? :scratch:



al.


22.5-the stock setting.

james
Logged

alexone

  • Full Member
  • Posts: 1983
  • Anthony Bower, Stan Rybbert, John Stoneborough
Re: Denon DL 103 and BP 1.5?
« Reply #4 on: 9 Oct 2009, 11:41 am »
ok, thanks!


al.
Logged
Pages: [1]   Go Up
« previous next »