« previous next »
Pages: [1]   Go Down

Source for copper spade terminals? (any or no plating) (was ring term.)

0 Members and 1 Guest are viewing this topic. Read 978 times.

James Romeyn

  • Industry Participant
  • Posts: 3329
  • James Romeyn Music and Audio, LLC
    • James Romeyn Music and Audio, LLC
Source for copper spade terminals? (any or no plating) (was ring term.)
« on: 28 Oct 2006, 01:56 am »
Changed from ring to spade terminals...Thanks all!

Looking for a good (read good price) copper-based spade terminals for 1/4" diameter studs & AWG 12 wire.  Larger AWG capacity is OK but no smaller than AWG 14.  Any plating including no plating is OK.  Did I say I like low prices?  (Need about 100.)

Vampire has them 4 prs $6.50, believe this includes heat shrink.  Insulators nice but not absolutely necessary.

Thanks much for your time.
Muhammad Al-Jimbolaya
« Last Edit: 31 Oct 2006, 02:54 am by RibbonSpeakers.net »
Logged

Steve Eddy

  • Full Member
  • Posts: 877
    • http://www.q-audio.com
Re: Source for copper ring terminals, any plating?
« Reply #1 on: 28 Oct 2006, 02:27 am »

Low prices? How's 31 cents each sound?

Mouser Part No. 571-33458

They're tin plated, but the base metal is copper, not brass.

se
Logged

James Romeyn

  • Industry Participant
  • Posts: 3329
  • James Romeyn Music and Audio, LLC
    • James Romeyn Music and Audio, LLC
Re: Source for copper ring terminals, any plating?
« Reply #2 on: 28 Oct 2006, 03:22 am »
Quote from: Steve Eddy on 28 Oct 2006, 02:27 am

Low prices? How's 31 cents each sound?

Mouser Part No. 571-33458

They're tin plated, but the base metal is copper, not brass.

se


Steve
You are de man!  Boy I love this forum.  Hey!  Why'd you take so long?  (30 mins)
Logged

Steve Eddy

  • Full Member
  • Posts: 877
    • http://www.q-audio.com
Re: Source for copper ring terminals, any plating?
« Reply #3 on: 28 Oct 2006, 04:04 am »
Quote from: RibbonSpeakers.net on 28 Oct 2006, 03:22 am
Steve
You are de man!  Boy I love this forum.  Hey!  Why'd you take so long?  (30 mins)

Sorry about that. Had to go bring peace to the Middle East and it took a bit longer than I anticipated.

Hey, nobody's perfect.  :green:

se

Logged

Scotty

  • Jr. Member
  • Posts: 135
Re: Source for copper ring terminals? (any or no plating)
« Reply #4 on: 29 Oct 2006, 03:53 am »
You could save the shipping and go to your local AutoZone or NAPA and buy
tin plated copper ring lugs. I think you can do better than 31 cents a piece.
Scotty
Logged

James Romeyn

  • Industry Participant
  • Posts: 3329
  • James Romeyn Music and Audio, LLC
    • James Romeyn Music and Audio, LLC
Re: Source for copper ring terminals? (any or no plating)
« Reply #5 on: 30 Oct 2006, 09:13 pm »
Never would'a thought of that...many thanks!
Logged

OTL

Re: Source for copper ring terminals? (any or no plating)
« Reply #6 on: 31 Oct 2006, 12:02 am »
This should get you through....cheep!  Quan 50, 8ga for $11 bucks.  Several other options.

http://www.mcmaster.com/

Page 706
Logged

James Romeyn

  • Industry Participant
  • Posts: 3329
  • James Romeyn Music and Audio, LLC
    • James Romeyn Music and Audio, LLC
Re: Source for copper ring terminals? (any or no plating)
« Reply #7 on: 31 Oct 2006, 02:55 am »
Quote from: Scotty on 29 Oct 2006, 03:53 am
You could save the shipping and go to your local AutoZone or NAPA and buy
tin plated copper ring lugs. I think you can do better than 31 cents a piece.
Scotty

Stores around here nickel only.
Logged
Pages: [1]   Go Up
« previous next »