Some boring background information before I start posting some pics....
* I am using 27/32" MDF for the build- A technical school no longer was teaching woodworking and sold a ton of "non regular" sizes of MDF extremely cheap, and we had this around the shop, so if it doesn't look like 3/4" in the pics, that is why
* I decided to tenon in the interior braces into the side of the cabinet. The tenons are 3/8" and all measurements were adjusted to make the interior spaces exactly the same as the instructions
* I tend to work with 1/64ths of inches when making flat work, and we got most of the measurements down to less than that after making the adjustments for the 27/32" MDF
* We have a ton of experience with veneers, and have typically used MEDEX for the base material, but we decided to use what we had on hand
* We have made decisions on how the veneers will best be applied using our techniques and may not be "normal" for most folks
* We use a special glue for our veneers which we have used on thousands of projects, and did not use iron on, or contact cement (more information later when we get to those steps)
* All of the work is done with machines and by hand, no CNC machines were harmed in the making of this post
* This is the first build I have done with speakers, and expect MR. MURPHY to join the party
* I am privileged to work in my woodworking mentors shop, which is Disneyland for woodworkers
* I have over 25 years worth of experience using the tools and techniques shown, and will point out when things are dangerous for someone who may not have used a tool or a specific technique