[Danny Richie]

I know, it has taken a while, but the NX-Otica MTM flat packs are here in stock.

The complete kit with flat pack is $1,229.



These are perfect for sitting on the dual servo subs.

Here are a couple of my favorite build threads for this model.

https://www.audiocircle.com/index.php?topic=146187.0

https://www.audiocircle.com/index.php?topic=149272.msg1596343#msg1596343

[Zitoun]

I know, it has taken a while, but the NX-Otica MTM flat packs are here in stock.

The complete kit with flat pack is $1,229.

These are perfect for sitting on the dual servo subs.
Here are a couple of my favorite build threads for this model.
https://www.audiocircle.com/index.php?topic=146187.0
https://www.audiocircle.com/index.php?topic=149272.msg1596343#msg1596343

Is it possible to have MTM and the servo sub in the same cabinet, as they have to work together anyway ?.

And what would be the total cost with all drivers MTM + servo + flat pack for something that will look like this?:


thanks

[WarmColors]

Danny,

For first time callers do we just let you know what speakers we want, ask if there is any upgrades? Have our credit card information ready?

Is there more to it? Any other questions you may have for us? Or pretty easy transaction.

Thank you.

[Captainhemo]

Is it possible to have MTM and the servo sub in the same cabinet, as they have to work together anyway ?.

And what would be the total cost with all drivers MTM + servo + flat pack for something that will look like this?:


thanks

I have actually played around with some  cabinet models of something  simlar by altering our Super 7  cabinet... shorter,  full inner wing,   , tight  radius  swooped outer wing.    I'm not sure how the   NQ's  would repond to the swooped outer wing ( and as the swoop gets tighter,  it looks more awkward.  You're  also increasing the baffle width by almost  50% to match   the width of the  lower  section.

Increasing the baffle width by that much with those  6.5"   drivers ended my  efforts on this one, didn't make sense to me

jay

[Tyson]

What about something like this?

[Wind Chaser]

Beautiful!

[Peter J]

Credit where credit is due.  ebag4 take a bow.

 Some great stuff in the "Build Threads" sticky for those new to the circle.

https://www.audiocircle.com/index.php?topic=146187.0

[Tyson]

What about something like this?

I should point out that ebag's build there is pretty complex compared to a standard flat pack.  I'm sure someone could build it for you but it will definitely be more expensive than the flat pack offered here (and which sounds great, BTW). 

So, if on a budget, go for the simple flat pack Danny put in the first post. 

If you have more $$, then a more complex build like ebags is possible.  And it's freaking beautiful!

[WarmColors]

What about something like this?

If I buy the MTM version do I need to buy the OB version for the subs? I was just considering getting sub kit 2 sealed.

[Tyson]

If I buy the MTM version do I need to buy the OB version for the subs? I was just considering getting sub kit 2 sealed.

OB is the way to go for the bass.

[WarmColors]

OB is the way to go for the bass.

Is it because the MTM is OB? Or just preference for having OB subs?

[Wind Chaser]

OB is the way to go for the bass.

But you could improvise with a regular sub if you don't have the funds to go with the OB subs.

Ed's craftmanship is outstanding.

If I could build the kit without screwing it up, primer and paint would be the best I could do.

[Wind Chaser]

How low does the upper MTM go and where abouts does it need to be crossed over?

[Tyson]

Is it because the MTM is OB? Or just preference for having OB subs?

2 reasons.  First is because the OB top section really needs the OB sub section to sound coherent.  Second, because servo OB bass is just better than box bass, IME. 

[Tyson]

How low does the upper MTM go and where abouts does it need to be crossed over?

100hz, if memory serves.  For the MTM version pictured in the first post of this thread.  There's also a tower version of the NX-Otica that goes down to 70hz. 

[Wind Chaser]

There's also a tower version of the NX-Otica that goes down to 70hz.

Link?

[Tyson]

Link?

http://gr-research.com/nx-otica.aspx

[Danny Richie]

Danny,

For first time callers do we just let you know what speakers we want, ask if there is any upgrades? Have our credit card information ready?

Is there more to it? Any other questions you may have for us? Or pretty easy transaction.

Thank you.

All is as easy as just given me a call.  And I'll answer all your questions.

[Captainhemo]

100hz, if memory serves.  For the MTM version pictured in the first post of this thread.  There's also a tower version of the NX-Otica that goes down to 70hz.

Another thing worth considering is s that the full NX-Otica  takes   the lower  end of the NQ workload away which is a good thing IMHO.  It crosses the NQ's  to the  lower 4 M165's at  around 200hz.  They provvide more impact  in the  100-200hz range  than the  2 NQ's  do

If you  have the room,  a pair of the full NX-Otica's and  either dual or triple OB subs is the way to go
jay

[ebag4]

Thanks guys.  I have been tweaking room position, seating position and servo amp settings over the last couple of months.  I must say the MTMs over servos are sounding fantastic, really locked in.

Best,
Ed