0 Members and 1 Guest are viewing this topic. Read 3612 times.
Was the tweeter you replaced on the RM40 a spiral ribbon or an Aurum Cantus? There could be a difference between the efficiency of the ribbons. The G2 has a sensitivity of 96db and I suspect the spiral ribbon might be somewhat less. You could easily be putting twice or more times the power required through the G2. Aluminium ribbons like the Aurum Cantus are sensitive to being overpowered and you might need to throttle back the power coming through the crossover to the tweeter [= appropriate resistors] to get the balance correct. What volume were you running the system when the tweeters flames out?
Hello Scott, there is a good chance that you burned up the 1.2uF capacitor (Auricap) in the tweeter crossover. The brown capacitor is most likely fine. You might want to unsolder them from the speaker post, to check them, to know for sure. Zak
Page created in 0.035 seconds with 29 queries.