I'm starting a new company and need a little help.

0 Members and 1 Guest are viewing this topic. Read 51086 times.

Folsom

Re: I'm starting a new company and need a little help.
« Reply #100 on: 17 Jun 2015, 01:52 am »
'Grid Audio'

That's not bad, actually. It plays on a number of things, but most importantly sounds nice. It sounds silly when you start adding to it.

Maybe Gr!D Audio would be fun. It shows a merger and you can just say grid.


Triode Pete

  • Industry Contributor
  • Posts: 1410
  • www.TriodeWireLabs.com
    • Triode Wire Labs - Affordable Audiophile Cables
Re: I'm starting a new company and need a little help.
« Reply #101 on: 17 Jun 2015, 02:04 am »
GarDan Technologies or DannyGary Technologies...

Good Luck to both of you!

Cheers,
Pete

gregfisk

  • Restricted
  • Posts: 1349
  • Us alone in the universe? sure is a waste of SPACE
Re: I'm starting a new company and need a little help.
« Reply #102 on: 17 Jun 2015, 02:42 am »
When you Google DODDAN AUDIO you get Dodd Audio all down the page.

Brings the old into the new............

Greg


konut

  • Full Member
  • Posts: 1581
  • Came for the value, stayed for the drama
Re: I'm starting a new company and need a little help.
« Reply #103 on: 17 Jun 2015, 03:38 am »
TexAmp Designs

dBe

  • Industry Participant
  • Posts: 2181
    • PI audio group, LLC
Re: I'm starting a new company and need a little help.
« Reply #104 on: 17 Jun 2015, 04:51 am »
Using a blues name generator for the letters - g (Gary), d (Danny), a (audio) I came up with Ugly Legs Jackson.

Probably not one I would use.  :green:

S Clark

  • Full Member
  • Posts: 7479
  • a riot is the language of the unheard- Dr. King
Re: I'm starting a new company and need a little help.
« Reply #105 on: 17 Jun 2015, 06:08 am »
Using a blues name generator for the letters - g (Gary), d (Danny), a (audio) I came up with Ugly Legs Jackson.

Probably not one I would use.  :green:
I dunno, it's got a funky sorta vibe to it. 

bdp24

  • Full Member
  • Posts: 884
Re: I'm starting a new company and need a little help.
« Reply #106 on: 17 Jun 2015, 12:05 pm »
I went through that thought process as well.  Something that kind of flips the finger at audio snobbery.

Based on battery-related theme, I thought "Acid Audio" would be an attention grabber.

GREAT name! Edgy, and nice alliteration. Plus the inside joke, for those hip to it.

rollo

  • Restricted
  • Posts: 5530
  • Rollo Audio Consulting -
Re: I'm starting a new company and need a little help.
« Reply #107 on: 17 Jun 2015, 02:25 pm »
 First off good luck with your new venture. Why not just keep GR Research ? Known, respected and easy. Resurgence Audio ?


charles

gregfisk

  • Restricted
  • Posts: 1349
  • Us alone in the universe? sure is a waste of SPACE
Re: I'm starting a new company and need a little help.
« Reply #108 on: 17 Jun 2015, 02:54 pm »
How about MISSION AUDIO RESEARCH or MISSION TECHNOLOGIES.

I know you are both men of faith so it has a double meaning.

RDavidson

  • Restricted
  • Posts: 2893
Re: I'm starting a new company and need a little help.
« Reply #109 on: 17 Jun 2015, 03:05 pm »
Resurgence Audio

That's a REALLY good one, rollo! Has meaning. Sounds good. Has the word "surge" in the spelling. Is closely related to Danny's original idea of something along the lines of "revive" or "revival." Excellent!

Captainhemo

Re: I'm starting a new company and need a little help.
« Reply #110 on: 17 Jun 2015, 03:13 pm »
So I've been silently lurking for the last two years kind of embarrassed because I haven't been able to do my speaker build.  (Ran into a stumbling block and then the garage got full and ... yadda yadda)  so guess I'm coming out of lurkkerdum

I really like some of the names so far.  In particular and no particular order:

Off the Grid Audio

#### audio (I like Texas Audio)

Current Audio


Here's my 2¢

Innovate Valves is Power (IV=P)  (perhaps too clever by 1/2?)  I hope you will do a DIY version with a chassis, box of parts, circuit diagram  an set of instructions.  The chassis would ensure the Dodd look of these amps (product recognition + a little extra personal pride). 

Next, Grateful Dodd Music  8)  :lol:  (OK or Grateful Dodd Audio; Grateful Dodd Amps) 
G. D. Research   8)  (or Dodd Research)


Welcome back George, great to "see"  you   :wave:
Hope  you find some  time to start on those cabinets so you can start enjoying  those  TL's  !!

jay

cleestedwood

  • Jr. Member
  • Posts: 67
Re: I'm starting a new company and need a little help.
« Reply #111 on: 17 Jun 2015, 03:50 pm »
How about   World's Greatest Audio    or  Great Crapp Audio .  That   Ugly Legs Jackson  does have a ring to it      The Best Little Audio House In Texas   

Guy 13

Re: I'm starting a new company and need a little help.
« Reply #112 on: 17 Jun 2015, 03:54 pm »
Pure Audio or Pure Power Audio ?

cleestedwood

  • Jr. Member
  • Posts: 67
Re: I'm starting a new company and need a little help.
« Reply #113 on: 17 Jun 2015, 03:56 pm »
Gadd Dari Audio ,  Gadd Dari Technologies  or Over The Top

srb

Re: I'm starting a new company and need a little help.
« Reply #114 on: 17 Jun 2015, 04:07 pm »
Using a blues name generator for the letters - g (Gary), d (Danny), a (audio) I came up with Ugly Legs Jackson.

Using the Adele Dazeem Name Generator (Travoltify your name)

Dodd + Richie =  Daud Reegers Audio

Richie + Dodd =  Rosie Doon Audio

Gary + Danny =  Graham Deeza Audio

Danny + Gary =  Darcy Geercia Audio

Wind Chaser

Re: I'm starting a new company and need a little help.
« Reply #115 on: 17 Jun 2015, 04:30 pm »
Danny,

As you want to appeal to the younger generation, you might be better off posing this question them rather than us. I suspect youthful suggestions will be quite a bit different than what you're getting here. As S Clark pointed out on page 4, Schitt happened by design. The name must call attention to the brand and resonate with the market you're after.

mlundy57

  • Industry Participant
  • Posts: 3630
Re: I'm starting a new company and need a little help.
« Reply #116 on: 17 Jun 2015, 04:36 pm »
Danny,

Since you want to appeal to the younger generation, you might be better off posing this question them rather than us. I suspect youthful suggestions will quite a bit different than what you're getting here. As S Clark pointed out on page 4, Schitt happened by design. The name must call attention to the brand and resonate with the market you're after.

Besides, this is the group that named the "Wedgie". While descriptive of the design, it still brings images of high school bullies to mind  :?

corndog71

  • Full Member
  • Posts: 1776
  • Some people call me Rob.
Re: I'm starting a new company and need a little help.
« Reply #117 on: 17 Jun 2015, 04:45 pm »
Hard Cell Audio

RDavidson

  • Restricted
  • Posts: 2893
Re: I'm starting a new company and need a little help.
« Reply #118 on: 17 Jun 2015, 04:51 pm »
Younger does not imply unsophisticated.
We're talking about components in the $1000 area.
This type of younger consumer would be likely the type to have graduated from things like Beats and may also be a fairly recent college graduate. They already appreciate better sound and may be into vinyl. They appreciate authenticity over marketing hoopla. They like products that enhance their lives by fitting into their lifestyles. While I think $1000 is a stretch for this type of consumer, they may splurge for the sophistication and authenticity factor, but the value still has to be apparent relative to alternative products.

Hank

  • Full Member
  • Posts: 1206
    • http://www.geocities.com/hankbond1/index
Re: I'm starting a new company and need a little help.
« Reply #119 on: 17 Jun 2015, 05:16 pm »
Picking your target market is critical.  Most recent college grads will not spend $1,000 each on a couple of pieces of audio equipment and they're not into separates.  I suggest the target market is older than 20's.