[satbox]

Hello,

I own a Bryston BDA-1 and I encounter the following strange problem: when it is in standby mode (standby led is lit red), sometimes, the Up-sample led starts to blink for a few seconds. When the Up-sample led starts to blink, sometimes, the standby led also starts to blink...

Do you know this problem? How can I solve it?

Thank you!

[alexone]

Satbox,

remove the power cable from the BDA and wait a few minutes. it should be ok then. my BDA had the same issue. i guess it's a software thing...


al.

[James Tanner]

Hi satbox,

That's a new one on me?  Alex you say it happen to you and you rebooted  - has it happened more than once?

james

[alexone]

James,

yes it happened 2 or 3 times. it's gone now... i already sent you an email with a video showing the BDA's usb input blinking red.

al.

[alexone]

James,

yes it happened 2 or 3 times. it's gone now... i already sent you an email with a video showing the BDA's usb input blinking red.

al.

James,

just to get it right:
the blinking thing appeared when i turned the BDA off. that was 2 or 3 times. after that i unplugged the power cable and the BDA rebooted. the issue was gone then.

al.

[satbox]

Hello James,

At my side, the problem arrives almost daily (not at a set time) and the leds blink at an irregular frequency during 1 or 2 minutes.

At your opinion, is it hardware or software? Let me know if you want that I test something to help you...

Thank you!

[James Tanner]

Hello James,

At my side, the problem arrives almost daily (not at a set time) and the leds blink at an irregular frequency during 1 or 2 minutes.

At your opinion, is it hardware or software? Let me know if you want that I test something to help you...

Thank you!

Hi satbox,

I took this to engineering but so far blank stares - we will continue to think about what it could be.  You can certainly load new sofware and see if that solves it.

james

[satbox]

OK, thank you for your quick feedback!

If you want that I load a new software, let me know and send it to me.

[James Tanner]

OK, thank you for your quick feedback!

If you want that I load a new software, let me know and send it to me.

Ok email me at jamestanner@bryston.com and I will send it.

james

[James Tanner]

Ok email me at jamestanner@bryston.com and I will send it.

james

Your email keeps bouncing back the executable file.

james

[srb]

James,
 
Although it could be an email client setting, some email servers are setup not to accept executable files.  You could try to zip it first.
 
Steve

[James Tanner]

James,
 
Although it could be an email client setting, some email servers are setup not to accept executable files.  You could try to zip it first.
 
Steve

Thanks Steve - got it to go through on a different email address.

james