Ok, we finally cut the initial run of these ( 8 pairs remaining as I type this). We'll cut more if there is interest. These came out really nice.. Rabbets for all outer panel joints, dados for internal bracing/divider and a full rabbet around the top for the included grill frame. Driver mounting screw pilot holes pre-drilled, .5" vertical roundover on front baffle edges and a nice radius on rear side of woofer cutout.A .125" pilot hole is pre-drilled in the grill frame for easy istallation of a small cabinet knob if desired.
Baffles with waveguides and backside operations take considerable time to cut, they are cut from solid 1.5" MDF , same material as our sub kits use. Not your typical box store MDF
Remaining outer panels are .75" Medex and internal bracing/dividers and grill frame are .5" Medex.
Price is $379/pair + shjipping (50lb 21x21x11" box). Shipping has typically been between $55 and $65 for this initial run.
These will be sold in order I receive emails firstname.lastname@example.org.
NOTE, you need to email me at the above address to confirm a pair
We sent a pair off to Peter so he could do an assembly video to help with kit assembly. Here is the link:https://www.youtube.com/watch?v=CYrdScf9eyM&feature=youtu.be