Earlier this year I bought a set of HARMONIC TECHNOLOGY PRO-9 PLUS Bi-Wire speaker cables. My needs were for a long (16 feet) run to one speaker and a shorter run (8-10 feet) to the other. My speakers are Von Schwiekert 4jr which have 16 inch spacing between bass and tweeter modules.
What I bought was a 50 foot pair! I have been cutting and terminating my cables including red/black shrink wrap at cable ends and custom beige braided sleeving to make these one inch diameter cables a bit less noticeable in the room.
I am offering to custom prepare a pair of these HT Pro 9 Plus bi-wire cables using the remaining cables I have, just about any length you need. Right and left sides do not have to be same length and tails can be different length too, as on my pair. I can custom terminate cables with either spades or bananas. I have used Harmonic Technology locking bananas left over for the speaker end as well as GLS Audio locking bananas for both ends. For my own system I am using Furutech FP-201 Rhodium spades on the speaker ends and DH Lab locking bananas on amp end.
I can email you photos if you wish.
By the way, these cables sound great! I could go on and on, but for this price, don’t wait:
COST: $15 per foot of HT Pro 9 Plus Bi-wire terminated with HT or GLS locking bananas.
For instance, a six foot pair is 6 X 2 X $15 or $180.
Or one six footer and one 10 footer is 6+10 = 16 X $15 or $240. Existing braided sleeve is original HT black with tan stripe (see HT ads). I have about 40 feet of new beige braided sleeving available at $1 per foot additional.
For more expensive terminations like the Furutech FP-201 on speaker end, I would add only my cost, no charge to install. I have no control over availability or shipping time for these extras.
Shipping will be determined by weight (cable length) and location. I will send CONUS only!
Please add 3% for PayPal.
Thanks for looking and let me know if you would like to receive photos.
