G2G \ DIY Meet 3/26/11

0 Members and 1 Guest are viewing this topic. Read 5705 times.

sts9fan

Re: G2G \ DIY Meet 3/26/11
« Reply #20 on: 23 Feb 2011, 03:35 pm »
Quote
Should I bring anything?

Music!

This is what I have

Main system downstairs:

SB Touch or TBD TT (w Benz Glider 2H) > Beresford DAC or PassDIY Pearl phono pre > old ARC L3 pre > Zen V9 Class A amp > Gedlee Nathans plus only one :oops: GR Servo sub

Upstairs:

Rega P1 w/ Denon DL-110 or SB3 > (needed Phono Pre) > TBD Pre > Quicksilver GLA > Solo 103, Woden Design Dunideer or Mark Audio Pensil 70 single driver speakers.

I may have a Aikido 6SN7 pre done by then but I am not that motivated.  I will more likely have a First Watt F5 clone finished. 

So if anyone has a pre, phono pre or dac that they want to bring that would work.   

Ericus Rex

Re: G2G \ DIY Meet 3/26/11
« Reply #21 on: 23 Feb 2011, 05:14 pm »
I can bring my Rogue 99 pre and/or my Ray Samuels Nighthawk phono pre and/or my Marantz SACD player.

sts9fan

Re: G2G \ DIY Meet 3/26/11
« Reply #22 on: 25 Feb 2011, 03:06 pm »
That sounds great as I do not have a cd player. 
Also I am now 98% sure I will have the F5 finished.

MarkM

Re: G2G \ DIY Meet 3/26/11
« Reply #23 on: 26 Feb 2011, 04:25 am »
Any extra seats open?  I have a tube amp I have been working on and would love to bring it to get some feedback on the sound.   KT88, CV18-Z, 6922 based.   Has Tentlabs bias board and some other good ingredients, just finished the  mahogany case.

Also have an Eastern Electric Dac I can bring if anyone is interested in hearing it.  I am waiting for Tentlabs shunt regulators to arrive to overhaul the whole thing to give it that true diy flavor.(diodes, caps, pot, etc)

Mark




sts9fan

Re: G2G \ DIY Meet 3/26/11
« Reply #24 on: 26 Feb 2011, 08:38 pm »
There is room for sure.  Looks like ~8 so far.  My place is small but I think it will be fine with up to 12 or so.     

enjoythemusic

Re: G2G \ DIY Meet 3/26/11
« Reply #25 on: 6 Mar 2011, 02:14 pm »
Alas, will be out of town that weekend :(

sts9fan

Re: G2G \ DIY Meet 3/26/11
« Reply #26 on: 8 Mar 2011, 03:46 pm »
I would love to give the EE dac a listen. 
Also, I was thinking of getting started around noonish.  I will send out a PM with my address next week. 

Kris

Ericus Rex

Re: G2G \ DIY Meet 3/26/11
« Reply #27 on: 8 Mar 2011, 04:43 pm »
 :thumb:

sts9fan

Re: G2G \ DIY Meet 3/26/11
« Reply #28 on: 8 Mar 2011, 04:47 pm »
Maybe I will pick up a port or late harvest zin to sip on with some cheeses  :thumb:

Ericus Rex

Re: G2G \ DIY Meet 3/26/11
« Reply #29 on: 8 Mar 2011, 08:21 pm »
 :thumb:!!!!!!!!!!!!!!!!!!!!!!!!!

MarkM

Re: G2G \ DIY Meet 3/26/11
« Reply #30 on: 13 Mar 2011, 04:29 am »
I would love to give the EE dac a listen. 
Also, I was thinking of getting started around noonish.  I will send out a PM with my address next week. 

Kris

I will plan on bringing the Eastern Electric Dac, with a complement of tubes.  Completed the first round of mods a couple of weeks ago.(20 schottky diodes, power suppply beefed up with better ripple filtration, bypass caps and coupling caps)   Wasn't able to use the Tentlabs regulators (opamp circuit current draw exceds rating, save for another project.)

Voltage regulators will be here next week.  Space is a premium, was planning on using only two Belleson regulators, 4 will be installed, this dac should really rock(already does).....If I don't short it out. :oops:

sts9fan

Re: G2G \ DIY Meet 3/26/11
« Reply #31 on: 18 Mar 2011, 05:02 pm »
Awsome! 
I will send out a PM early next week with my address to everyone who as expressed interest. I was think of a Noon start.  Now I have to go home and plug away at my F5.  Its so nice out now though we shall see if I don't end up outside instead. 

sts9fan

Re: G2G \ DIY Meet 3/26/11
« Reply #32 on: 22 Mar 2011, 01:44 pm »

Ericus Rex

Re: G2G \ DIY Meet 3/26/11
« Reply #33 on: 22 Mar 2011, 02:50 pm »
WE WILL BE IN THE COMPANY OF A DIY REVIEWER!!!!!!!!!

 :notworthy:

sts9fan

Re: G2G \ DIY Meet 3/26/11
« Reply #34 on: 22 Mar 2011, 02:58 pm »
WE WILL BE IN THE COMPANY OF A DIY REVIEWER!!!!!!!!!

 :notworthy:

I think you meant DIY Hack

Ericus Rex

Re: G2G \ DIY Meet 3/26/11
« Reply #35 on: 27 Mar 2011, 07:33 pm »
Many thanks to Kris for hosting us yesterday.  Even though I had to leave a little early (sorry!) I had a great time with some good tunes, good sound, good cheese, good beer and excellent conversation.

Kris is the man!

MarkM

Re: G2G \ DIY Meet 3/26/11
« Reply #36 on: 27 Mar 2011, 08:52 pm »
It was nice to meet some fellow New Englanders passionate about audio.  Thank you Kris for putting on a VERY nice spread of food and beverages!!

I really was digging the vinyl-digital a/b we did.  I thought the Rega/Pearl was a nice combo and that has inspired me to look into diy phono preamps.   The Eastern Electric dac I brought was a tad on the bright side and not very involving for my taste with the LME49720 installed.  I should have changed out the opamps.

Thanks again Kris for being a gracious host.  The two systems allowed me to hear single drivers(hadn't heard them before) and the Nathans as I might be in the market for a new speaker.

oneinthepipe

  • Full Member
  • Posts: 1378
  • Trainee
    • Salk Signature Sound/Audio by Van Alstine two-channel system
Re: G2G \ DIY Meet 3/26/11
« Reply #37 on: 27 Mar 2011, 11:02 pm »
Yes, Kris, thank you.   The transitions between drivers in the Nathans is seamless.  They are very impressive.  I hope that you will be able to listen to my Salks before I move.

Nice seeing you all yesterday.  Maybe we can combine a weekly STi meet and NEAR G2G @ my house some Wednesday night.  Cars, music, but no chicks.

I have photos but dont know how to upload.  If I could email them to someone that can upload them, I would be grateful.

sts9fan

Re: G2G \ DIY Meet 3/26/11
« Reply #38 on: 27 Mar 2011, 11:16 pm »
Thanks everyone for stopping over. It was fun to play around with all the different sources.  We should try and do it more
often.

DougSmith

  • Jr. Member
  • Posts: 158
  • What will the next hundred years bring?
Re: G2G \ DIY Meet 3/26/11
« Reply #39 on: 28 Mar 2011, 12:58 am »
Post some of those pics, Henry.