At RMAF (room 1102) I will be introducing my latest bipolar-type speaker, the Strato Prism. It's sort of a cross between the
Cloud Chaser and the
Rhythm Prism:

What you don't see in the photo is the side-firing woofer and horn. A combination of geometry and aggressive radiation pattern control relegates the side array's output to the reverberant field, where it significantly increases the amount of reverberant energy that arrives from the sides. This is the most beneficial direction, according to Floyd Toole and the body of research cited in his
book.
A nice side effect (bad pun intended) is that the Strato Prism can be placed much closer to the wall behind it than my more conventional bipoles.
Since the angle between the toed-in front array and the side array is "twisted" by about 45 degrees (they are 135 degrees apart instead of 180 degrees), I'm calling it a "twisted bipole".
The result is dipole-like spaciousness and openness along with horn-like dynamics and impact, in a more room-placement-friendly (and narrower footprint) package than my previous bipoles. Note that my waveguide speakers and my waveguide-style horn speakers (like this one) have consistently won over people who "hate horns", and the Strato Prism likewise has negligible horn signature.
The twisted bipole format will not replace my other bipoles; rather, it expands the number of room situations that can benefit from a good bipole.
The concept actually goes back to about 1990, when I was a DIY guy. I did some experiments with several different geometries and the side-firing array sounded the best, provided I observed certain guidelines. Unfortunately I didn't know anything about radiation pattern control, so the results were mixed. I actually submitted an article on the design to Speaker Builder magazine, but it was rejected.
Then recently I read Toole's book in which he claimed that reflections arriving from the sides were particularly beneficial. Well I dusted off my old concept and embarked on a new round of experimenting, and in a simple blind test the basic configuration of the Strato Prism did quite well.
Note that I am not the first to use side-firing drivers. I was preceeded by DCM (the Time Window), Acoustic Research (the Magic speaker), ESP (all of their models, I think), and last but not least, Audience (most of their innovative ClairAudient line, though the normal recommended setup is with the second array rear-firing instead of side-firing). I think I am the first to combine all of the following elements in one speaker: Aggressive radiation pattern control; 45-degree toe-in of front drivers; second array fires to the side, thus selectively enhancing side-arriving reverberant energy; and vertical offset of drivers, in particular the woofers, to help smoothe the in-room bass.
Since the Strato Prisms can be placed much closer to the wall behind them than my other bipoles, greater adjustability in the bass region is called for. On the upper rear of the enclosure are two ports, a long one and a short one, and port plugs are provided. If you aren't getting much boundary reinforcement, leave both ports open. If you are getting some boundary reinforcement, plug the long port. If you're getting a lot, plug the short port. If you are getting a lot PLUS using a low damping factor tube amp, plug 'em both. The port lengths can also be adjusted. The locations of the twin ports and two woofers are staggered in all three dimensions, so that the in-room bass sources are each a different distance from the room boundaries. And like my previous models, the treble can be adjusted by changing a high-quality resistor in a cup on the back of the speaker.
I'm fairly excited about this speaker; I think it challenges my top-of-the-line models for half the price, and in a more placement-friendly package. And, I think it looks more interesting than most big boxes - not an area where my speakers historically do well.
Preliminary specs:
System Type: Twisted bipole
Bass system: Ported, adjustable tuning, gentle roll-off.
Impedance: 16 ohms, tube-friendly
Efficiency: 95 dB/1 watt; 2.83 volt sensitivity = 92 dB.
Thermal compression: Less than 1 dB at 100 watts (115 dB)
Typical bandwidth, solid state amp: Mid 30's to 18 kHz
Typical bandwidth, low damping factor tube amp: Low 30's to 18 kHz
Dimensions: 44" tall by 15" wide by 22" deep
Weight: 175 pounds
Price: $5,800 plus shipping in walnut veneer (pictured), direct sales only
Woodwork by Swainston Mill & Cabinet of Preston, Idaho.
Thanks for taking a look.
Duke