Dear Howard,
you are perfectly welcome.
I undertand that you have to have lots of cheap R's to try out best result. As same for the L until you are there in the locker. I normally use 0.11 mH for tweeter and 1.0 mH for strong mid- or woofer.
Otherwise I use > 1.0 mH for bass weakeness woofers.
In the big TL (1 tweeter soft dome and 1 Woofer of 15 inch I use L1= 0,11 and L2 = 1.0 since that 15 incher can go quite high.
On my 3-ways OB I use L1= 0.11 mH, L2 = 5.6 mH and L3 = 10 mH since the direct constantivity horn is working 500-21000 Hz.
I do not understand how conventional x-over works i.e. 1st, 2nd order, 6-12-24 dB/Octave. So, please continue your experiments and measurement etc.
Please let me know when you are finding yourself in the locker and how you like it compared to conventional x-over. Advantage/disadvantage.
Cheers
Pheesama