Class D Audio Amp Aluminum Cases (DIY amp case) SOLD OUT

jtwrace · « **Reply #20 on:** 4 Sep 2010, 09:02 pm »

Thanks for all the kind comments.

To Rocket, I would find a way to deal with the not perfect dimensions as you will have a finished professional case when it's done. It's not far off the dimensions that you want...

jtwrace · « **Reply #21 on:** 6 Sep 2010, 01:55 pm »

Quote from: toxteth ogrady on 4 Sep 2010, 02:07 am

This is a great deal for a finished and professional looking case folks. I regret not getting this instead of the Par-Metal case I purchased. Once you factor in the cost of the Par-Metal case + shipping + tools + finishing you're going to go well north of $150.

You're correct! Sadly, many need to find this out...

jtwrace · « **Reply #22 on:** 7 Sep 2010, 04:33 pm »

I want to thank those that have ordered...

I'm going to extend this until Wednesday 9/8/10 at 5:pm est.

First come, first serve as there are less then a handful of them left.

pjchappy · « **Reply #23 on:** 7 Sep 2010, 04:47 pm »

Quote from: jtwrace on 7 Sep 2010, 04:33 pm

First come, first serve as there are less then a handful of them left.

Great to hear!

Again, I highly recommend this case!

Paul

bprice2 · « **Reply #24 on:** 7 Sep 2010, 05:02 pm »

The skills I learned in shop class in the 8th grade are gone, as I have recently learned while attempting to build a box for my amp. So, I just bought one of Jason's boxes.

Thanks for extending your Labor Day Sale, Jason.

bprice2 · « **Reply #25 on:** 7 Sep 2010, 05:20 pm »

In less than 15 minutes from placing my order I've already received a tracking number. This guy's good!

jtwrace · « **Reply #26 on:** 8 Sep 2010, 04:26 pm »

Quote from: bprice2 on 7 Sep 2010, 05:20 pm

In less than 15 minutes from placing my order I've already received a tracking number. This guy's good!

If the UPS system was quicker it would have taken 5 min. Sorry it took that long.

jtwrace · « **Reply #27 on:** 8 Sep 2010, 04:50 pm »

There are three cases left as of now. 5 hrs to go until the sale ends...

Gopher · « **Reply #28 on:** 8 Sep 2010, 06:38 pm »

Quote from: I.Greyhound Fan on 8 Sep 2010, 05:44 pm

Here are some other options for cases-

http://www.vt4c.com/shop/program/main.php?cat_id=1032&group_id=2

http://www.parts-express.com/pe/showdetl.cfm?Partnumber=262-430

http://www.8audio-mall.com/servlet/the-473/High-dsh-End-Solid-Aluminum-Case/Detail

ROFL!

Is that really appropriate in his for sale thread?

I.Greyhound Fan · « **Reply #29 on:** 8 Sep 2010, 06:51 pm »

Sorry, I did not realise this and I will delete the post!

jtwrace · « **Reply #30 on:** 9 Sep 2010, 11:30 pm »

That's ok. It's all good! These are USA made cases that are .125" thick NOT China made 3mm thick. Yuck!!! Big difference in construction and finish quality...maybe some of the buyers will chime in with their opinions.

Still a few left...

JeffBrown · « **Reply #31 on:** 10 Sep 2010, 12:14 am »

Hey, I'll go on the record as a huge fan of Parts Express to say that the case listed by them is an absolulte POS compared to the JWRace version. First off Punching the correct holes in the right places and predrilling for the mounting posts and transformer mechanically makes this more expensive case worth the extra cash. The build support and parts list also go along way towards making this somewhat intimidating task much more do able as well.

JWRace makes a solid well laid out case for not a lot of funds, I tried to do it my self, and after floundering for a bit 190 bucks seemed like the bargain of a lifetime!

Jeff Brown

jtwrace · « **Reply #32 on:** 16 Sep 2010, 12:43 pm »

bump for the last two.

santacore · « **Reply #33 on:** 19 Sep 2010, 01:19 am »

I got one of Jason's cases last week and I'm very pleased. It's a little bigger then expected, but really nicely designed, and very solid. This case is a big step up from the Hammond boxes. I'm so glad I bought this over trying to modify a generic case.

Thanks for a great deal!

jtwrace · « **Reply #34 on:** 19 Sep 2010, 05:29 pm »

Quote from: santacore on 19 Sep 2010, 01:19 am

I got one of Jason's cases last week and I'm very pleased. It's a little bigger then expected, but really nicely designed, and very solid. This case is a big step up from the Hammond boxes. I'm so glad I bought this over trying to modify a generic case.

Thanks for a great deal!

Glad you're happy! That was the whole purpose of doing this.

I've had many inquires about these...just to let you know they're first come first serve for the last ones.

Bemopti123 · « **Reply #35 on:** 19 Sep 2010, 06:38 pm »

I am interested in one of them. Please pme for details of payment as well as entire cost of order.

etcarroll · « **Reply #36 on:** 19 Sep 2010, 07:10 pm »

Do you think the tube from one of these hybrid amps would fit?

http://cgi.ebay.com/Excellent-2-X-LM3886-6N11Tube-Audio-Amplifier-Board-/190445200753?pt=LH_DefaultDomain_0&hash=item2c576b2571#ht_4353wt_911

jtwrace · « **Reply #37 on:** 19 Sep 2010, 07:15 pm »

Quote from: etcarroll on 19 Sep 2010, 07:10 pm

Do you think the tube from one of these hybrid amps would fit?

http://cgi.ebay.com/Excellent-2-X-LM3886-6N11Tube-Audio-Amplifier-Board-/190445200753?pt=LH_DefaultDomain_0&hash=item2c576b2571#ht_4353wt_911

dimensions? One way or the other it could...

jtwrace · « **Reply #38 on:** 19 Sep 2010, 07:38 pm »

Quote from: Bemopti123 on 19 Sep 2010, 06:38 pm

I am interested in one of them. Please pme for details of payment as well as entire cost of order.

PM Sent

jtwrace · « **Reply #39 on:** 24 Sep 2010, 01:35 pm »

Class D Audio Amp Aluminum Cases (DIY amp case) **SOLD OUT**

Class D Audio Amp Aluminum Cases (DIY amp case) SOLD OUT