Audio component cleaning

0 Members and 1 Guest are viewing this topic. Read 2505 times.

Laundrew

  • Full Member
  • Posts: 7136
  • "Sometimes it rains inside my head..."
Audio component cleaning
« on: 25 Oct 2009, 08:41 pm »
I was in the process of cleaning my audio components and I am curious what other individuals like to use to clean their black or aluminium finished audio components :scratch:

srb

Re: Audio component cleaning
« Reply #1 on: 25 Oct 2009, 09:07 pm »
I use a damp microfiber cloth followed by a dry microfiber cloth.
 
If it needs anything more than that, then I will dampen the cloth in mild dishsoap water.
 
Steve

Phil A

Re: Audio component cleaning
« Reply #2 on: 25 Oct 2009, 10:46 pm »
I use Quick 'N Brite.  I have used it for years. Very gentle in diluted form.  Basically mix a teaspoon or so of the pink gel in a quart of water in a spray bottle by heating it in the microwave.  Costs about a dime for that quart and cleans most anything.

ian.ameline

Re: Audio component cleaning
« Reply #3 on: 26 Oct 2009, 04:05 am »
As I recall, Bryston uses windex to clean their gear prior to packing and shipping.

That's what I use. Works fine on aluminum or glass.




Robert D

Re: Audio component cleaning
« Reply #4 on: 26 Oct 2009, 09:19 pm »
I use a damp microfiber cloth followed by a dry microfiber cloth.
 
If it needs anything more than that, then I will dampen the cloth in mild dishsoap water.
 
Steve

Same here but I use a luc Warm damp microfiber cloth followed by a dry microfiber cloth

Robert

srb

Re: Audio component cleaning
« Reply #5 on: 26 Oct 2009, 09:33 pm »
I use a damp microfiber cloth followed by a dry microfiber cloth.
 
If it needs anything more than that, then I will dampen the cloth in mild dishsoap water.
 
Steve

Same here but I use a luc Warm damp microfiber cloth followed by a dry microfiber cloth

Robert

Robert, great cleaning cloth, that microfiber!  I use it around the house and on and in the car.  I probably have 4 or 5 different types/fiber length.
 
Besides, the ammonia in Windex and other ammonia-based cleaners is poisonous and can be highly irritating to the eyes, nose and lungs.
 
Steve

Laundrew

  • Full Member
  • Posts: 7136
  • "Sometimes it rains inside my head..."
Re: Audio component cleaning
« Reply #6 on: 26 Oct 2009, 10:42 pm »
I use a damp microfiber cloth followed by a dry microfiber cloth.
 
If it needs anything more than that, then I will dampen the cloth in mild dishsoap water.
 
Steve

Where can you purchase this microfiber cloth and is there a trade name for it?

Thanks :D

Be well...

bummrush

Re: Audio component cleaning
« Reply #7 on: 26 Oct 2009, 11:02 pm »
       3 M makes some nice ones

Mag

Re: Audio component cleaning
« Reply #8 on: 26 Oct 2009, 11:06 pm »
If you have a Princess Auto in your area, you can find them there. I bought a package of 4 microfiber cloth by Furgale for under $10 cdn..


Laundrew

  • Full Member
  • Posts: 7136
  • "Sometimes it rains inside my head..."
Re: Audio component cleaning
« Reply #9 on: 26 Oct 2009, 11:41 pm »
If you have a Princess Auto in your area, you can find them there. I bought a package of 4 microfiber cloth by Furgale for under $10 cdn..

Thanks for the information :D I have a Princess Auto 5 mins away (what an awesome store)

 :thumb:

Mag

Re: Audio component cleaning
« Reply #10 on: 27 Oct 2009, 12:09 am »
Sometimes they bring in surplus stuff. If you get there at the right time you can find valued usable items at a reasonable low price. They even have an audio section! :thumb:

Robert D

Re: Audio component cleaning
« Reply #11 on: 27 Oct 2009, 07:56 am »
I use a damp microfiber cloth followed by a dry microfiber cloth.
 
If it needs anything more than that, then I will dampen the cloth in mild dishsoap water.
 
Steve

Where can you purchase this microfiber cloth and is there a trade name for it?

Price Club or Canadian Tire

Robert D

Re: Audio component cleaning
« Reply #12 on: 27 Oct 2009, 08:08 am »
On My Desk I have a ViewSonic wide screen LCD
Once again I use luc Warm damp microfiber cloth followed by a dry microfiber cloth
It works Great
Even In my Bed Room On My Pioneer Elite Plasma
The secret is that it is only damp not wet

Robert


srb

Re: Audio component cleaning
« Reply #13 on: 28 Oct 2009, 06:02 pm »
I just got an email from TigerDirect, and one of the items they were selling was an LCD screen cleaning kit with some cleaning gel and a NanoFiber cloth.
 
Hey, I don't have any NANO Fiber!  I could be missing out on something.  I'll have to get back to you.
 
Steve

vegasdave

  • Full Member
  • Posts: 4039
    • My online rock magazine-Crypt Magazine
Re: Audio component cleaning
« Reply #14 on: 30 Oct 2009, 01:01 am »
As I recall, Bryston uses windex to clean their gear prior to packing and shipping.

That's what I use. Works fine on aluminum or glass.





Same here.

Robert D

Re: Audio component cleaning
« Reply #15 on: 30 Oct 2009, 01:32 am »
damp microfiber cloth

That's all you Need

Robert

srb

Re: Audio component cleaning
« Reply #16 on: 30 Oct 2009, 01:40 am »
damp microfiber cloth

That's all you Need

Robert

Robert, you and I are of one mind, but now we're just going back and forth here. 
 
Some people prefer a chemical cleaner (even if it's rather posionous) and some prefer a gentler natural method.
 
Some people prefer chemical-free natural foods.  Others could care less about chemicals and additives in their food.
 
Different strokes for different folks.  At least now they are aware that there is an alternative.
 
Steve