[Christof]

Doing an annual fall cleaning in my studio and have a few things that might be useful for DIY builders...

Pics here: tools

Dewalt DW 362 Circular Saw...well used but works great, trigger is on it's way out (new one about $20)...free you just pay shipping...$125new
Porter Cable 444 Profile Sander....includes case and lots of sanding pads (50 or more)...works good...$25.00...$125new Sold
Dewalt Right Angle Drill #955...9V model...works fine...might need battery to be reconditioned in the near future...has case & 2 batteries....$25.00...$125 new.
Porter Cable 18g pneumatic brad nailer #BN 125A...case...works good...$20.00
Makita cordless impact driver kit 14.4v includes impact driver, drill and flashlight...2 batteries, charger and case.....everything works great but batteries need to be reconditioned or replaced...$70.00....$225 new Sold
Porter Cable 324Mag Circular saw with Eureka EZ guider rail system 100"...comes with extra splinter guards and I'll include a circle jig free...no case for saw but like new condition...$200.00 Sold
Rockler/Incra router fence positioner...$18.00...$60new
Dewalt DW621 router with edge guide....very trusty router...very well used....missing one of the turrit stops, no big deal...$35.00 Sold
Freud Super Dado 8"....good shape...sharp...outside blades need cleaned...too busy to do it myself....in case with shims...$80.00...new $225
Porter Cable #7335 5" VS sander....works very well, has not seen much use...$40.00.....$130new Sold
Dewalt DW443 6" VS sander...works well...cant find the dust bag.....used to rub finish on cabinets before switching to Festool....55.00...$160 new Sold

Added 9/30

Bosch router kit #1608...this is a sweet "micro" router aka laminate router set.  This is more for detail work but it is very capable of routing holes through 3/4" mdf with a circle jig.  Kit contains multiple bases including a tilting base.  If you really want to get fancy with cabinets Micro Fence makes all sorts of attachments for this router.  The 1608 is a go to edge router in many a woodworkers shop.  Has metal case and works very well.  I have a few of these but I'm only willing to sell one.  $100$90...new $300.   Follow the link above for pics. Pending

Added 11/12 
Anyone interested in a very nice veneer press?  I have an extra VacuPress vacuum pump and a couple heavy weight poly bags.  The pump retails around $725 and the bags start about $200....if you are interested shoot me a pm and we can discuss your veneering needs and work up a sweet deal.  Look here for info on the blue standard VacuPress

[S Clark]

I'll buy the Dewalt DW621 router.   You have a PM.

[Christof]

Sorry S Clark, the 621 is pending....you got a PM off to me before I had a chance to edit the list.

[S Clark]

No problem.  If the sale falls through, send me a PM.

[Bill Baker]

 Darn, I wish I had noticed this thread sooner 

[Christof]

updated 9/30

[Jeff M]

I want the Festool stuff

[nicksgem10s]

PM sent

[Christof]

Updated and lowered some prices 10/1

[Christof]

I want the Festool stuff

    I will entertain trades for a good matched pair of tubes for my Candela ...50's ECC82 CBS or something sweet ...but definitely not for my Festool stuff

[S Clark]

I'll take the Dewalt DW443 if it's available. 

[nicksgem10s]

Just wanted to thank you for a great deal on the Makita set & Porter Cable sander.

Great deals from a great seller.  I hope to be able to use them in some future audio projects 

It looks like there are still some very good deals available.

-Nick

[Tyson]

I'll take the Porter Cable Profile Sander, if it's still available.

[Christof]

Updated 10/14

Thanks guys...we do have some woodworkers around here

[TomS]

Updated 10/14

Thanks guys...we do have some woodworkers around here

So did you just switch to an all German tool shop?  I should have looked at this stuff when I was there...

[Christof]

Updated 10/14

Thanks guys...we do have some woodworkers around here

So did you just switch to an all German tool shop?  I should have looked at this stuff when I was there...

  I must admit, there is quite a bit of German technology in my shop but I've been meaning to thin things down a bit for quite a while, just not one for letting go I guess....but hey, so far everything has gone to good homes .  Now if I could just convince myself to let some veneer go I would be able to reclaim quite a bit of space in my wee shop.

Oh.....Seriously someone should grab the Bosch router kit.....yes, it was replaced by a Festool but nonetheless it is a hell of a router kit for $100

[Christof]

Very nice veneer press up for grabs....info contained in my first post
Lowered prices on remaining tools.

[mdabb]

Hello,

I am unable to send a PM for some reason  .................... If this item (Bosch router kit #1608) is still available, could you please PM me your email or email me at: mdabb@comcast.net

Thank you,

Andrew