[Ron]

 I am finishing up on building a pair of AV-3's,but have a question regarding the best method for attaching the griil cloth to the grill frame. Normally I just staple the grill cloth to the back of the grill frame;however,since the AV-3 frame is rather thin at the top and bottom I don't think stapling would be the best method to use. I have also used 3M Super 77 spray adhesive in the past,but found that it has a tendency to loose its adhesiveness over a period of time allowing the cloth to start pulling away from the frame. Does anyone have any recommendations as to other attachment methods that might work better?

[Joey Skinner]

I've used contact cement.

[Bill Baker]

The easiest way is to use spray adhesive (contact cement). Simply dry fit the grill cloth over the frame to find out where to apply the adhesive and then make a cardboard pattern to fit on the cloth as not to get any adhesive on the visable area.

[Ron]

  Thanks for your suggestions regarding the grill cloth attachment. I have already attached with some spray adhesive and it seems to be holding just fine.

[Bill Baker]

Glad it worked out for you Ron. To repeat what I mentioned in your other post......very nice looking speakers.