[BillB]

Anything will help, especially what tubes are supposed to be installed.

I picked one up today and I love it so far but I have read it has 12au7s in it and mine has 6922s which are not compatible as far as I know. I don't know if someone modified it to use them or not.

Again, any info would be greatly appreciated...oh yeah info on the outputs as well.

Thanks!!

[steve k]

According to the schematic in the VTL Book, The deLuxe uses (2) 12AX7's and (1) 12AT7 in one channel so you can double that for both channels. This includes a phono stage.
steve

[BillB]

There are a total of 5 tubes in it.

A 12ax7 far left which is for the phono, a big gap then another 12ax7, then 2 (in mine) 6922s, and a single 12at7.

(PS, thanks for the help)

Here is a pic of mine:

[steve k]

I would think the 6922's should be 12AX7's. That would give you (2) 12AX7's per side plus one 12AT7. There are no 6922's shown in DAvid Manley's schematic.

[BillB]

Thats what scares me and I cannot tell if someone modded it to use 6922s or not as I don't have the schematic.

It works with the 6922s so I assume someone modified it, but I think it would take more than just the 9 pin swap to make it work.