[Bill Baker]

I still have a few of the 2" aluminum chassia available. They do not come with RCA jacks or IEC (the IEC unit is available from Mouser for less than $3).
 I do not have the gold screws shown that hold the face plate and cover on. Only a few of the aluminum units will be available as they are not quite tall enough for my original intentons.

 These are the Entry 60 cabinets originally sold by Ken at DigitalAnalougeDIY for $90 each.

 Make great peramp chassis, digital amp or external crossover chassis.

 Selling for $85 ea. / $75 ea. x2 or more
 SHIPPING INCLUDED IN PRICE

Specification:
 
Front plate material: 5 mm brushed aluminum (blank)
Front plate width: 420 mm/16.5"
Front plate height: 66 mm/2.6"
Chassis height: 60 mm/2.4"
Chassis width: 390mm/15.4"
Chassis depth: 295mm/11.6"


 I am not selling the 4" tall version or any black units.

[Bill Baker]

Sorry guys, I forgot to post a picture of the back end. These chassis come with the cutouts as shown in this picture but not the hardware.

[Bill Baker]

With things changing in our ventures, I no longer have a use for these chassis so I am letting them all go.
I do not have the IEC inserts or screws for the cover plates.
VERY LIMITED NUMBER OF BLACK CHASSIS AVAILABLE.

2" version available in black or aluminum = $70 ea.


4" version available in Black or Aluminum = $85 ea.
These chassis have several accommodations for both RCA jacks and XLR.

[Bill Baker]

Hi guys,
 I do not know how to post pictures from my files to AC but for those who have PM'ed me requesting pictures of the back side of the 4" chassis, please feel free to send me an email at Response34@aol.com and I will send the picture along.

[JohnR]

Hi Bill, I just made a post here that might help with the iamges:

http://www.audiocircle.com/index.php?topic=30605.msg272138#msg272138

Could you tell me the weight of each chassis? I will be in PA in September, perhaps I could get you to send me a few there and then I'll post them home to myself...