What do you use as speaker support bases?

0 Members and 2 Guests are viewing this topic. Read 14887 times.

Ulisse60

  • Jr. Member
  • Posts: 121
Re: What do you use as speaker support bases?
« Reply #20 on: 4 Feb 2026, 02:52 pm »
I have Gaia II under my Apollos, and I quite like them. I haven’t compared them to other systems - including Lou’s isolation devices which I also own.
Hello mresseguie

How did you place the Gaia II under the speakers? Are they screwed directly under the speakers? 
If I replaced the Gaia with the current spikes on the Daedalus base, I would achieve a further lowering of the speakers, which would create an alignment problem between my ears and the tweeters. Besides the fact that I don't know if this is feasible, do you happen to know what thread pitch the Soundcity tips on the Daedalus base have?

Thanks for your input.

Regards, Dario

mresseguie

  • Full Member
  • Posts: 4958
  • SW1X DAC+ D Sachs 300b + Daedalus Apollos = Heaven
Re: What do you use as speaker support bases?
« Reply #21 on: Yesterday at 12:43 am »
Hello mresseguie

How did you place the Gaia II under the speakers? Are they screwed directly under the speakers? 
If I replaced the Gaia with the current spikes on the Daedalus base, I would achieve a further lowering of the speakers, which would create an alignment problem between my ears and the tweeters. Besides the fact that I don't know if this is feasible, do you happen to know what thread pitch the Soundcity tips on the Daedalus base have?

Thanks for your input.

Regards, Dario

Dario,

It's been years since I installed the Gaia II, so I don't recall if I used adapters or not. I also don't know the pitch. Why don't you address your questions to Lou Hinkley? He's very helpful.

Ulisse60

  • Jr. Member
  • Posts: 121
Re: What do you use as speaker support bases?
« Reply #22 on: Yesterday at 03:01 pm »
Dario,

It's been years since I installed the Gaia II, so I don't recall if I used adapters or not. I also don't know the pitch. Why don't you address your questions to Lou Hinkley? He's very helpful.

Thank you Mresseguie for your reply.

I will ask Lou directly for some suggestions, because the idea of taking the Ulysses down from the stands without certainty of installing the Gaia, with the risks of moving the speakers, discourages me from doing it without assurance of a successful replacement with the Gaia. Moreover, there is still the situation of further lowering the speakers, which goes against the logic of raising the tweeters a bit to better align them with ear level...

Best regards, Dario

Early B.

Re: What do you use as speaker support bases?
« Reply #23 on: Yesterday at 03:39 pm »
Moreover, there is still the situation of further lowering the speakers, which goes against the logic of raising the tweeters a bit to better align them with ear level...

Don't place too much emphasis on aligning the tweeter at ear level. That's a consideration during the speaker design process, but it's neither practical nor necessary in a typical listening environment, given the myriad of other more relevant factors, such as room acoustics, speaker positioning, speaker angle/tilt, driver dispersion and directivity, etc.

Tone Depth

  • Full Member
  • Posts: 655
  • Music Lover
    • SRLPE Wheel Works
Re: What do you use as speaker support bases?
« Reply #24 on: Today at 02:53 am »
The acoustics in my untreated multi-purpose family room are suboptimal, first-reflections probably smear the soundstage image, and the ceiling is asymmetrically vaulted. When my monitor speaker tweeters are aimed laterally and vertically directly at my ears, I experience the best soundstage at my single listening location.

Multiple people, though, simultaneously experience differences in the lateral soundstage, which therefore is neither listener-friendly nor beneficial to our hobby. The best solution for my situation, is to aim the left speaker at the center of the left seat on a three-seat sofa and aim the right speaker at the center of the right seat. This gives a relatively stable soundstage across the width of the sofa.

I also have listened intently with several vertical height positions of the speakers above the floor. My prior speakers were balanced on the mantle of our fireplace, which gave standing people a better vertical soundstage, great for parties, but seated people a diminished vertical soundstage. Positioning my present monitor speakers about 6" below ear height while seated, and pulled out from the front wall, improved the mid-range floor reflections off a thick carpet over a tile floor. There wasn't noticeable height to the soundstage. Positioning my monitor tweeters at seated ear level, and only 6" away from the front wall, gives the best vertical soundstage for my room.