« previous next »
Pages: [1]   Go Down

Enclosures for Raw Drivers

0 Members and 1 Guest are viewing this topic. Read 2749 times.

FullRangeMan

  • Volunteer
  • Posts: 20874
  • To whom more was given more will be required.
    • Never go to a psychiatrist, adopt a straycat or dog. On the street they live only two years average.
Enclosures for Raw Drivers
« on: 8 Jan 2017, 11:36 am »
DeltaLite II 2515: BassReflex or Vented box.
Internal dimensions for hi-fi service, for duct or vent sizes contact Eminence or vendor.
Rectangular:
W45cm x D32cm x H90cm=129,6L
Slanted:
W45cm x D36cm, 28cm x H90cm=129,6L
Avoid use smaller box.
« Last Edit: 8 Jan 2017, 01:45 pm by FullRangeMan »
Logged

FullRangeMan

  • Volunteer
  • Posts: 20874
  • To whom more was given more will be required.
    • Never go to a psychiatrist, adopt a straycat or dog. On the street they live only two years average.
Re: Enclosures for Raw Drivers
« Reply #1 on: 8 Jan 2017, 11:56 am »
Satori MR16P-4 6inches 4 ohms, exotic Egyptian Papyrus Cone, useful 92,5dB sensitivity.
https://www.madisoundspeakerstore.com/approx-6-midrange/satori-mr16p-4-6-egyptian-papyrus-cone-midrange-4-ohm/#tab-1
BassReflex or vented 78L box for two 4 ohms drivers connected in serial for tube friendly 8 ohms load.
Rectangular shoebox, internal dimensions:
W23cm x D37cm x H92cm=78,3L
Wide baffle version:
W37cm x D23cm x H92cm=78,3L
For smaller box decrease the height.
Logged

FullRangeMan

  • Volunteer
  • Posts: 20874
  • To whom more was given more will be required.
    • Never go to a psychiatrist, adopt a straycat or dog. On the street they live only two years average.
Re: Enclosures for Raw Drivers
« Reply #2 on: 8 Jan 2017, 12:27 pm »
AudioNirvana Classic10Alnico or other AN 10'' hi VAS FR.
http://www.commonsenseaudio.com/an10classicalnicospecs.jpg
BassReflex or Vented internal dimensions:
Rectangular shoebox:
W36cm x D40cm x H120cm=172,8L
W36cm x D43cm x H120cm=185,8L
Slanted:
W36cm x D43cm, 37cm x H120cm=172,8L
For smaller box decrease the height.
« Last Edit: 8 Jan 2017, 02:14 pm by FullRangeMan »
Logged

JLM

  • Full Member
  • Posts: 10741
  • The elephant normally IS the room
Re: Enclosures for Raw Drivers
« Reply #3 on: 9 Jan 2017, 12:14 pm »
Are these drivers/cabinet sizes you recommend?  Is it based on personal experience?  (If so care to share your impressions?)
Logged

FullRangeMan

  • Volunteer
  • Posts: 20874
  • To whom more was given more will be required.
    • Never go to a psychiatrist, adopt a straycat or dog. On the street they live only two years average.
Re: Enclosures for Raw Drivers
« Reply #4 on: 9 Jan 2017, 02:45 pm »
I recommed based on the datasheet, no listening experience.
Logged

FullRangeMan

  • Volunteer
  • Posts: 20874
  • To whom more was given more will be required.
    • Never go to a psychiatrist, adopt a straycat or dog. On the street they live only two years average.
Re: Enclosures for Raw Drivers
« Reply #5 on: 16 Jan 2017, 08:39 pm »
AudioNirvana Classic6.5Alnico BassReflex box, Golden ratio internal dimensions:
Slim:
W23,5cm x D38cm x H61,4cm=55L
Wider:
W38cm x D24cm x H62cm=56,5L
Floorstanding:
W38cm x D24cm x H96cm=87,5L
Logged

srb

Re: Enclosures for Raw Drivers
« Reply #6 on: 16 Jan 2017, 10:25 pm »
I don't get it.  I could post 1000 drivers with enclosure sizes based on data sheets.  What's the point of this topic?
Logged

opnly bafld

Re: Enclosures for Raw Drivers
« Reply #7 on: 16 Jan 2017, 10:26 pm »
He's upset that JLM has more posts than he does.
Logged

mresseguie

  • Full Member
  • Posts: 4821
  • SW1X DAC+ D Sachs 300b + Daedalus Apollos = Heaven
Re: Enclosures for Raw Drivers
« Reply #8 on: 17 Jan 2017, 01:49 am »
Quote from: opnly bafld on 16 Jan 2017, 10:26 pm
He's upset that JLM has more posts than he does.

 :rotflmao: :rotflmao:

I'm jealous as hell!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Thanks for the effort, FRM.
Logged

FullRangeMan

  • Volunteer
  • Posts: 20874
  • To whom more was given more will be required.
    • Never go to a psychiatrist, adopt a straycat or dog. On the street they live only two years average.
Re: Enclosures for Raw Drivers
« Reply #9 on: 17 Jan 2017, 12:40 pm »
Quote from: mresseguie on 17 Jan 2017, 01:49 am
:rotflmao: :rotflmao:

I'm jealous as hell!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Thanks for the effort, FRM.
Thankyou Michael you most kind.
As my contribution to FR drivers and DIY people was not appreciated I will not post more projects.
Logged

JLM

  • Full Member
  • Posts: 10741
  • The elephant normally IS the room
Re: Enclosures for Raw Drivers
« Reply #10 on: 17 Jan 2017, 12:59 pm »
Quote from: opnly bafld on 16 Jan 2017, 10:26 pm
He's upset that JLM has more posts than he does.

 :lol:

Didn't realize we were that close on number of posts, or that it was a contest.   8)
Logged

mresseguie

  • Full Member
  • Posts: 4821
  • SW1X DAC+ D Sachs 300b + Daedalus Apollos = Heaven
Re: Enclosures for Raw Drivers
« Reply #11 on: 17 Jan 2017, 04:13 pm »
I think FRM was offering up ideas as a form of brainstorming. Potentially, an inexperienced lurker might see something that catches his/her imagination. It's enough to send him/her off to Madisound or Meniscus Audio, etc. From there, new ideas can jump forth. When I first discovered DIY speakers, I spent countless hours reading about dozens of different designs before I jumped in and bought a pair of GR Research LGKs followed by a pair of Adelphos speakers.

FRM,

Your effort was not completely unappreciated, okay?  :thumb:
Logged
Pages: [1]   Go Up
« previous next »