Montreal Audio Show 2016

Guy 13 · « **Reply #60 on:** 20 Mar 2016, 06:57 pm »

I remember that those two little ones sounded nice, very nice,
mids and highs were clear and bass was good.
No, I did not ask for the price, because that make of speakers is
not cheap...

Jimmy71 · « **Reply #61 on:** 20 Mar 2016, 06:59 pm »

Quote from: James Tanner on 20 Mar 2016, 03:27 pm

Hi Folks

Some shots of the room:

james

Hi James can you please give us some shots of a black 4b3 with handles and without?l leds on!
Thank you .

Guy 13 · « **Reply #62 on:** 20 Mar 2016, 07:03 pm »

Tannoy !
(I like that speaker manufacturer.)
That was for me the biggest deception of the show.
From low to high frequencies nothing good,
well, for that perticular model.
I wanted to hear the Tannoy Westminster Royal
but of course, they did not have it, too big.

Don_S · « **Reply #63 on:** 20 Mar 2016, 07:35 pm »

Guy,

Thank you for all of the photos.

James Tanner · « **Reply #64 on:** 20 Mar 2016, 07:36 pm »

Quote from: Jimmy71 on 20 Mar 2016, 06:59 pm

Hi James can you please give us some shots of a black 4b3 with handles and without?l leds on!
Thank you .

Hi

Sorry I do not have any pictures of the Black with handles. This is the one shot I have of Black with no handles.

Guy 13 · « **Reply #65 on:** 20 Mar 2016, 07:47 pm »

Quote from: Don_S on 20 Mar 2016, 07:35 pm

Guy,

Thank you for all of the photos.

Thanks Don,
sorry about the poor quality of my coverage.
If I do again a louzy job like that,
I will be spread with honey and thrown in a barrel of red ants...

Guy 13

Jhayman · « **Reply #66 on:** 20 Mar 2016, 07:59 pm »

Thank You Guy for all the pics..

Guy 13 · « **Reply #67 on:** 20 Mar 2016, 09:28 pm »

Quote from: Jhayman on 20 Mar 2016, 07:59 pm

Thank You Guy for all the pics..

You are welcome Jhayman.
Looking at my pictures and (Very few and accruate) comments I realize
that I've could have done a much better job if I took a little more time.
Sorry.

Guy 13

redbook · « **Reply #68 on:** 21 Mar 2016, 01:57 am »

Really enjoyed the pix.....thanks again

redbook · « **Reply #69 on:** 21 Mar 2016, 01:59 am »

Quote from: Guy 13 on 20 Mar 2016, 07:47 pm

Thanks Don,
sorry about the poor quality of my coverage.
If I do again a louzy job like that,
I will be spread with honey and thrown in a barrel of red ants...

Guy 13

Hey don't be so hard on yourself......

redbook · « **Reply #70 on:** 21 Mar 2016, 02:00 am »

Quote from: Jimmy71 on 20 Mar 2016, 06:59 pm

Hi James can you please give us some shots of a black 4b3 with handles and without?l leds on!
Thank you .

Guy 13 · « **Reply #71 on:** 21 Mar 2016, 06:59 am »

Quote from: redbook on 21 Mar 2016, 01:59 am

Hey don't be so hard on yourself......

Hi redbook,
if I want to improve and-or not do the same mistake, I have to be hard on myself,
otherwise I will do poor jobs in the future...

Guy 13

alexone · « **Reply #72 on:** 22 Mar 2016, 08:54 am »

hi, Guy 13!

thanks for the pictures

the Tannoy's were powered by Bryston electronics, correct?!?

al.

James Tanner · « **Reply #73 on:** 22 Mar 2016, 10:17 am »

Quote from: alexone on 22 Mar 2016, 08:54 am

hi, Guy 13!

thanks for the pictures
the Tannoy's were powered by Bryston electronics, correct?!?

al.

Yes they used a BP26 and 7B's but a Linn server.

james

Guy 13 · « **Reply #74 on:** 22 Mar 2016, 10:21 am »

Quote from: alexone on 22 Mar 2016, 08:54 am

hi, Guy 13!

thanks for the pictures
the Tannoy's were powered by Bryston electronics, correct?!?

al.

Hi al.
Yes, that's correct,
however, the Bryston room had a better sound than the Tannoy,
mainly because the bass even if less imposing, was more natural
with the Bryston MiniT speakers.
Excuse if I repeat myself,
but I was really disapointed with the performances of that perticular Tannoy model,
again maybe because of the room acoustic
and certainly not becaue of the Bryston electronics.

Guy 13

James Tanner · « **Reply #75 on:** 22 Mar 2016, 10:35 pm »

James

This system in Montreal Show was amazing, holographic imaging and very natural and dynamic sound.

Denis Trudeau

James Tanner · « **Reply #76 on:** 29 Mar 2016, 03:19 pm »

MEMO: To All Bryston Customers
SUBJECT: Montreal Audio Show – Bryston Demo 2016

March 2016

``I began by visiting the Bryston room where the company revealed numerous new products, including the highly anticipated Cubed series amplifiers and the company’s first series of compact components. The Cubed series offers a refreshing new look and a total of six new amplifier models to choose from, rated from 135 watts per channel all the way up to 1000 watts per channel.

In contrast to the full-sized Cubed amplifiers, the new compact components offer a taste of the legendary Bryston sound in a compact package and affordable price points. The three compact components on display included the BDP-Pi digital audio player, BMC phono preamp and PS-3 power supply.

After discontinuing CD player production several years ago, Bryston has decided to bring a brand new BCD-3 disc player into production – also shown at the show.

The all Bryston system on demo inside this room – highlighting the 4B Cubed amplifier – served up a rich, vivid musical experience. I’ve long enjoyed the sound of Bryston amplifiers and this is the cleanest, most detailed sound I’ve heard from their amplifiers yet. Look out for a review of one of these in an upcoming issue of CANADA HiFi.``

redbook · « **Reply #77 on:** 29 Mar 2016, 11:50 pm »

It reads that the new player will go into production...is this accurate?

hoping so

rmurray · « **Reply #78 on:** 1 Apr 2016, 05:00 pm »

James , will the cd player go forward or did it lack enough response...thanks

James Tanner · « **Reply #79 on:** 1 Apr 2016, 05:35 pm »

Quote from: rmurray on 1 Apr 2016, 05:00 pm

James , will the cd player go forward or did it lack enough response...thanks

Actually we got 5 orders at the show and many more since so I am going ahead with it.

Bit of a surprise actually given the negative responses from dealers and distributors before we actually showed it

james