0 Members and 1 Guest are viewing this topic. Read 6506 times.
"I feel like I was let into the biggest secret in home audio reproduction"...Well articulated and says a lot about Omega and Decware. I own Louis' Super 5's and have extensively heard his Hoyt Bedord Type 1's. A truely "organic" audio experience.
Thanks guys. I had the floor standing Hoyt Bedfords for a month back in the day and ended up returning them...not my cup of tea. Beautifully made, and Louis is a great guy, but they sounded wooly and flat to me with a Decware SET in my listening space. I had them burning in for the better part of a month playing constantly but they never opened up, to my ears at least. But I'm open to give the Omega's a shot considering the rave reviews, the philosophy, and the different drivers and cabinet design...and, frankly, because I had such an overall positive experience with Louis.
Yeah. Despite the sensitivity rating, you also have to keep in mind the moving mass of the driver. I haven't heard Hoyts, but their larger drivers probably need more than a couple of watts....or you'll end up with an underdamped sound. Of course, small tube amps aren't exactly known for their damping factor either. This can sound lovely in some setups, but in others, it won't work too well. So, I don't think it was so much that the Hoyts were doing anything wrong, they just weren't a good match for your setup.If you plan to keep your Decware, I think Omegas will serve you much better. The 3xrs is a fantastic speaker. The 3i with a sub may be even better.
I'm with you and my system is very near the point where I'm pretty sure I'll be done with the gear merry go round indefinitely. I've slowly edged this direction over the last 2-3 years while being able to try out a lot of stuff and gain experience. Sure, I might upgrade my DAC and make other small tweaks (as significant technological advances happen and become affordable). I may also buy other stuff here and there out of curiosity, but it won't be due to feelings that something better is around the corner. It's fun playing around with different stuff, especially when it can be done inexpensively.
md92468,What are you running for an amp, or if you intend to try Omegas, what amp do you plan to run?
I'm open, but had a few thoughts...• This 300B is on the list:http://www.commonsenseaudio.com/nirvanaamps.html• Clones audio's 25iR is interesting...I heard gain clones with the Druids and loved the match.• Decware, of course, but probably not a flea amp. Skittish on the pairing after the HB experience. I would like the ability to add a sub in the future, though, so that's a consideration. In the meantime I have my dad's 40+ year-old Dynakit ST-70, which I Curcio modded a few years ago...that thing just keeps on ticking...
I would not put too much faith in a $1500 300B. Likely Asian import.If you want a nice chip amp, check this out. Killer bargain and terrific sounding. http://www.audiosector.com/chassis_integrated.shtmlDon't judge the Decware by the Hoyts. The Super Zen is still my #1 amp for Omegas and has been for over 6 years.If you're into building, check out the Bottlehead Stereomour. http://bottlehead.com/product/stereomour-ii-stereo-single-ended-integrated-2a3-amp/If a sub has speaker level inputs, it will work with any amp, including what I've mentioned here.
You might try the NuPrime IDA 8 ; Small full function integrated. It also has pre-outs in case you want to play with a tube amp or two later. Apparently the preamp section is nice too. Uses something similar to a resistor ladder (if I understand correctly), which is especially unusual for an integrated under $1000. I've found class D, like class A, to sound excellent whether pushing a fraction of a watt or pushing toward their limits. Class D is more versatile vs Class A, obviously.