[Robin1]

Hi guys...was downloading new software on the weekend.All went well until the very end
screen on bdp says BDP-1 is rebooting....then new date comes up   2010-10-19....then initializing......then shuts itself off.  When I power it back up it appears It went backwards as far as updateing went.....but my biggest concern is after 25 seconds of initailizing....it powers down.  My question is there some way to do a manual reset....hard to do when it shuts itself off before I can access the menu.....dead bdp-1
thanks in advance for any ideas
Robin

[skunark]

I had issues with the front panel as well so i just cleared my browser cache, relogged into the http://bryston-bdp-1.local and did the reset there from the settings.   That seemed to work.. of course I couldn't get the update to work via the webpage so I just ran the firmware script locally.

[Robin1]

thanks...but I can't loggin...because my bdp1 shuts itself off
James is sending me a new flashcard.....hopefully that solves  the shut down problem

Robin

[unincognito]

Is it shutting itself off after about two minutes?

Cheers
Chris

[Robin1]

Hi Chris.....only gives me about 25 seconds....won't get past initializing
James said he was sending me a flash card to replace mine
Robin

[Robin1]

wow...recieved the new flashcard......replaced....now my bdp goes past the initializing then
the screen shows serial #    then S1.40    2012-05-10     Thats where it sits.....
navigation buttons won't let me access .   Do I need to do a reset somehow? Connect it to the  internet again?  I know I'm kinda of computer stupid but the last update went so smooth
thanks for all the help so far
Robin

[Robin1]

just want to say thank you to James & Chris for helping me out
you guys are the best.....now I can sit down and rebuild some playlists
life is good ...with bryston
thanks again
Robin

[SkotiPati]

wow...recieved the new flashcard......replaced....now my bdp goes past the initializing then
the screen shows serial #    then S1.40    2012-05-10     Thats where it sits.....
navigation buttons won't let me access .   Do I need to do a reset somehow? Connect it to the  internet again?  I know I'm kinda of computer stupid but the last update went so smooth
thanks for all the help so far
Robin

Dear Robin,

I am experiencing the exact problem you have. How did you solve it?

Cheers

[unincognito]

Dear Robin,

I am experiencing the exact problem you have. How did you solve it?

Cheers

Thats a different issue and will require a phone call or reflashing of the cf card.

https://dl.dropboxusercontent.com/u/86196657/DOCS/BDP%20image%20Windows.pdf

Cheers,
Chris

[bjski]

Chris,
We have the BDP-2 working great. It downloaded the new firmware today no problem. Do you think I should tackle my BDP-1 and download maniac moose?
Cheers,
BJ