BRYSTON and PMC Open Day at ZINC-HT March 17th!

0 Members and 1 Guest are viewing this topic. Read 24446 times.

Vipers

Re: BRYSTON and PMC Open Day at ZINC-HT March 17th!
« Reply #20 on: 26 Jan 2012, 04:44 pm »
I drove the 1M earlier.  Needless to say I was impressed and very happy - I bought it!
Kyri

Congrats on the new toy Kyri, I don't blame you, the 1M is supposed to be a stonking motor, can't wait to see it, what colour have you gone for?

I'll get the SP3 box measurements for you just so you can check that it will fit in the boot OK :icon_twisted:

saveloy

Re: BRYSTON and PMC Open Day at ZINC-HT March 17th!
« Reply #21 on: 26 Jan 2012, 05:38 pm »
Congrats on the new toy Kyri, I don't blame you, the 1M is supposed to be a stonking motor, can't wait to see it, what colour have you gone for?

I'll get the SP3 box measurements for you just so you can check that it will fit in the boot OK :icon_twisted:

Thanks matey,

Valencia Orange - the only colour to have in my opinion. I could do with a 7B in the boot. At the moment it has a bunch of Harman audio in it.
Roll on Tuesday. I'm picking it up from Stevenage. That's not far from Zinc, is it?!!

Kyri

James Tanner

  • Facilitator
  • Posts: 20857
  • The Demo is Everything!
    • http://www.bryston.com
Re: BRYSTON and PMC Open Day at ZINC-HT March 17th!
« Reply #22 on: 26 Jan 2012, 05:48 pm »
Thanks matey,

Valencia Orange - the only colour to have in my opinion. I could do with a 7B in the boot. At the moment it has a bunch of Harman audio in it.
Roll on Tuesday. I'm picking it up from Stevenage. That's not far from Zinc, is it?!!

Kyri

Picture please :thumb:

james

Vipers

Re: BRYSTON and PMC Open Day at ZINC-HT March 17th!
« Reply #23 on: 26 Jan 2012, 11:36 pm »
Thanks matey,

Valencia Orange - the only colour to have in my opinion. I could do with a 7B in the boot. At the moment it has a bunch of Harman audio in it.
Roll on Tuesday. I'm picking it up from Stevenage. That's not far from Zinc, is it?!!

Kyri

Nice colour, Stevenage is where I used to live for 10 years until 3 months ago, it's about 15 minutes from Zinc, straight up the A1M, if you've got the time Kyri please pop in, be good to see you :thumb:

Something like this I take it? I have to say it nearly even looks as sexy as an SP3 :wink:








SoundGame

Re: BRYSTON and PMC Open Day at ZINC-HT March 17th!
« Reply #24 on: 27 Jan 2012, 01:00 am »
...Something like this I take it? I have to say it nearly even looks as sexy as an SP3 ;)

Agree :thumb:  - I'd to like to see both in fishnets....

Levi

Re: BRYSTON and PMC Open Day at ZINC-HT March 17th!
« Reply #25 on: 27 Jan 2012, 03:15 am »
Nice!  It looks like it is on steroids.

saveloy

Re: BRYSTON and PMC Open Day at ZINC-HT March 17th!
« Reply #26 on: 27 Jan 2012, 12:26 pm »






That's the one!  She does look very angry, doesn't she?!
Vipers, I was just kidding - I know exactly where you are!  If I can I will certainly pop in to see you. 

Kyri

SHV

  • Full Member
  • Posts: 410
Re: BRYSTON and PMC Open Day at ZINC-HT March 17th!
« Reply #27 on: 27 Jan 2012, 04:00 pm »
The width of the tires says that she means business.  When I drive behind a car with a "sporty" appearance and then see narrow tires, I think: "designed by the marketing department". 

Steve

Vipers

Re: BRYSTON and PMC Open Day at ZINC-HT March 17th!
« Reply #28 on: 27 Jan 2012, 07:21 pm »

Vipers, I was just kidding - I know exactly where you are!  If I can I will certainly pop in to see you. 

Kyri

I thought you must have been having a senior moment there for a minute, considering you'd already been over to Zinc, be good to see the car though, and you of course Kyri, that is if you can free the time from all the posing you must have planned from Tuesday onwards :)

saveloy

Re: BRYSTON and PMC Open Day at ZINC-HT March 17th!
« Reply #29 on: 27 Jan 2012, 07:32 pm »
I thought you must have been having a senior moment there for a minute, considering you'd already been over to Zinc, be good to see the car though, and you of course Kyri, that is if you can free the time from all the posing you must have planned from Tuesday onwards :)

Well, I have a lot of people to see on Tuesday!  I don't know how far I'll get and how many tankfuls I'll get through, but I will certainly aim to swing by.  Roll on Tuesday!!

Kyri

Vipers

Re: BRYSTON and PMC Open Day at ZINC-HT March 17th!
« Reply #30 on: 28 Jan 2012, 11:20 pm »
Well, I have a lot of people to see on Tuesday!  I don't know how far I'll get and how many tankfuls I'll get through, but I will certainly aim to swing by.  Roll on Tuesday!!

Kyri

OK mate, enjoy, if you do make I'll be able to show you my new Zetec S fiesta :roll:

BTW, what is the expected MPG from the 1M?

saveloy

Re: BRYSTON and PMC Open Day at ZINC-HT March 17th!
« Reply #31 on: 29 Jan 2012, 01:28 pm »
OK mate, enjoy, if you do make I'll be able to show you my new Zetec S fiesta :roll:

BTW, what is the expected MPG from the 1M?

The MPG is shocking, actually.  Shockingly good!  It has stop-start, so the town MPG is likely to be around 30.  And no less than 25.  All things considered that's great. 

Kyri

SHV

  • Full Member
  • Posts: 410
Re: BRYSTON and PMC Open Day at ZINC-HT March 17th!
« Reply #32 on: 29 Jan 2012, 03:12 pm »
"BTW, what is the expected MPG from the 1M?"
***

OT and out into the weeds but:
MPG??  I thought the Burma, Liberia and the bloody Americans were the last hold outs from the "French" system of weights and measures. :>)

Steve

mclsound

  • Full Member
  • Posts: 646
Re: BRYSTON and PMC Open Day at ZINC-HT March 17th!
« Reply #33 on: 29 Jan 2012, 03:28 pm »
Damn
Just got Van Halen tickets for March 17
Good luck on your openning day

Vipers

Re: BRYSTON and PMC Open Day at ZINC-HT March 17th!
« Reply #34 on: 29 Jan 2012, 10:32 pm »
Damn
Just got Van Halen tickets for March 17
Good luck on your openning day

Can't argue with that, I've never seen Van Halen live, should be pretty good I'd guess.

Have a good one :thumb:

Vipers

Re: BRYSTON and PMC Open Day at ZINC-HT March 17th!
« Reply #35 on: 31 Jan 2012, 09:51 pm »
Hi Guys, here is a PDF that PMC sent over today, more info on the BHA-1, looks like it is going to be with us for the Bristol show with release from 1st of March, can't wait myself, so it certianly looks promising that we will have a BHA-1 available for the open day :thumb:






Vipers

Re: BRYSTON and PMC Open Day at ZINC-HT March 17th!
« Reply #36 on: 31 Jan 2012, 09:52 pm »
Kyri,

Did you get your new wheels today? didn't see you at Zinc, I assume you was having too much fun :)

saveloy

Re: BRYSTON and PMC Open Day at ZINC-HT March 17th!
« Reply #37 on: 1 Feb 2012, 12:08 am »
Kyri,

Did you get your new wheels today? didn't see you at Zinc, I assume you was having too much fun :)

OH MATE!!!  Really sorry, I forgot to tell you.  The paperwork didn't come in, so I HOPE to pick her up tomorrow.  Unfortunately, there's only a very slim chance that I'll be able to get in to see you though. 

Kyri

Vipers

Re: BRYSTON and PMC Open Day at ZINC-HT March 17th!
« Reply #38 on: 1 Feb 2012, 07:53 pm »
OH MATE!!!  Really sorry, I forgot to tell you.  The paperwork didn't come in, so I HOPE to pick her up tomorrow.  Unfortunately, there's only a very slim chance that I'll be able to get in to see you though. 

Kyri

No problem Kyri, hope you managed to collect it today, I'm at Zinc everyday except Thursdays and Sundays so anytime you are passing please feel free to pop in :thumb:

saveloy

Re: BRYSTON and PMC Open Day at ZINC-HT March 17th!
« Reply #39 on: 2 Feb 2012, 01:19 am »
Thanks mate. 
I picked her up late afternoon and boy am I happy.  She is simply awesome.  Genuinely quick, brilliantly agile and so playful.  It was mighty cold, so I daren't turn the traction control off.  But the traction light was flashing on every corner!  It's bloody lovely.





Kyri
« Last Edit: 2 Feb 2012, 01:12 pm by saveloy »