Asking $3,000
Evans/Augusta, GA 30809 local pickup
The cost of the raw parts has gone up thanks to Bidenomics:
Accuton Cell C25-6-158: $554 each
Accuton Cell C90-6-724: $742 each
Scanspeak Illuminator 18WU/4747T-00: $356 each
Raw cost of parts is $3,304 plus tax, crossover parts and cabinetry if you were to build these yourselves. This is also a commercial product and not a DIY project.
Clearwave Symphonia
Accuton Cell c25-6-158 - Hificompass -
https://hificompass.com/en/speakers/measurements/accuton/accuton-c25-6-158-cellAccuton Cell C90-6-724 - Hificompass -
https://hificompass.com/en/speakers/measurements/accuton/accuton-c90-6-724Scan-speak Illuminator 18wu-4747T00 VoiceCoil Review -
https://www.scan-speak.dk/datasheet/reviews/18WU-4747T00-VoiceCoil_2010-4.pdf
The woofer has an impressive Klippel verified 10mm xmax. The C90-6-724 inverted dome midrange is HiFiCompass's favorite Accuton midrange.
Here's the list of features:
Made in the USA cabinetry
German top of the line driver technology
Accuton Cell midrange/tweeter array
Low parts count crossover
ERSE air core inductors
Mundorf capacitors and resistors in tweeter signal path
Mundorf resistors
Cardas soldering all point to point from binding posts to drivers
High-end Supra wiring
Cardas patented binding posts
Custom engraved binding post plate and port ring to lower resonance.
Braced baffle and sidewall technology
Flared port for low noise
Proprietary damping material to turn vibration into heat
Size: 8.25"W X 35"H X 11.5" D (cabinet tapers back and slopes 5 degrees)
Frequency Response: 38hz-25khz
Minimum Power Requirements: 35watt (tube) 50watt (solid state). 86db/2.83v/meter
3-way fullrange loudspeaker
Tweeter/midrange array decoupled by expanding o-ring driver technology mounted to custom aluminum mounting plate
1 x 25 mm Accuton Cell ceramic tweeter
1 x 90 mm Accuton Cell ceramic midrange
1 x 184 mm Illuminator woofer, long excursion design with under-hung voicecoil
Bassreflex port design for lowest port noise with dual flared ends.
Height adjustable isolation outriggers
impedance: 4 ohm (lowest point: 3.1 ohm at 100Hz)
Standard veneers include: Cherry, Walnut, Ebony (faux)
Weight: 2 x 65 lbs. (plus packaging)
