X-Statik and X-Voce build

0 Members and 1 Guest are viewing this topic. Read 249 times.

dryan01uk

  • Jr. Member
  • Posts: 38
X-Statik and X-Voce build
« on: 11 Oct 2021, 01:45 am »
Thought I'd post a photo log update on progress with my X-Statik and X-Voce build - still can't work out to straighten up the images though... 

I starting way back in July when I received my parts from Danny.



Time to start developing some wood working skills.  Learning to cut straight was never so much fun - next time I'll buy a cheap table saw:



Found out about dust collectors and DIY cyclones from You-Tube along the way.



and ended up looking like a yellow Darth Vader with all the PPE - because, y'know, MDF:



Lots of parts cut up at this point:

and


First glue-up on my DIY assembly jig- used local Perbond F20 polyurethane glue to hide a multitude of sins:




...

dryan01uk

  • Jr. Member
  • Posts: 38
Re: X-Statik and X-Voce build
« Reply #1 on: 11 Oct 2021, 01:57 am »
continued:

you can never have enough clamps - started at 4 now have 10 - Irwin must make a fortune from DIYers.

Current stage - dry fit and test fitting of tweeters and woofers - the tweeters are a very tight fit which I assume is normal.



Next steps ...

  • make bases
  • route cables in baffles
  • make grills
  • assemble cross-overs
  • paint
  • veneer
  • etc etc.

Impressions so far with working weekends only, as a lock-down project, its a lot of fun and it may be getting me a bit fitter - beats sitting in front of the silly box when I'm not working.

My wood working skills have grown exponentially, and it keeps my out of trouble with her indoors.

Can't wait to find out what they sound like - maybe this side of Christmas (this year!).  Then, once new floors and kitchen are in, room treatment (diffusion and absorption),  some OB subs and some rears.

David

AlexH

Re: X-Statik and X-Voce build
« Reply #2 on: 11 Oct 2021, 02:56 am »
Congratulations, those are coming along nicely. Be careful with the wood working, it can become addicting. Then not only will you start collecting speakers and stereo equipment you become a tool collector as well.
Don't ask me how I know. :lol: 

Peter J

  • Full Member
  • Posts: 1686
  • Hmmmm
Re: X-Statik and X-Voce build
« Reply #3 on: 11 Oct 2021, 04:54 pm »
Current stage - dry fit and test fitting of tweeters and woofers - the tweeters are a very tight fit which I assume is normal.

...

FWIW, I wouldn't consider this normal or desirable. If it's tight now, it will get tighter after finishing because of film buildup. Whether veneer or paint is intended, I would error on the larger side and black out sides of rabbet if raw MDF is peeking through.

dryan01uk

  • Jr. Member
  • Posts: 38
Re: X-Statik and X-Voce build
« Reply #4 on: 11 Oct 2021, 08:56 pm »
FWIW, I wouldn't consider this normal or desirable. If it's tight now, it will get tighter after finishing because of film buildup. Whether veneer or paint is intended, I would error on the larger side and black out sides of rabbet if raw MDF is peeking through.

Thanks Peter - I was a bit worried about that - I'll open up the pass through port for the tweeters a bit further - the recess is a nice 'snug' fit.  I've allowed for the thickness of the veneer, so they should come up 'flush'.  I was also planning to paint the inside of the ports and back of the exposed baffles with black matt rustoleum.  I've seen some people use that here to great effect - I'll plan to do the same with the recesses.

Do you have any thoughts on how to strengthen the screw locations for the various speakers - I was planning to pilot the screw holes then fill with CA (super) glue, so that I can run them in and out a few times, if necessary?

@AlexH - thanks for the encouragement - its slow but steady progress.  I know exactly what you mean about woodworking being addictive - I'm seriously thinking about designing and building my own media cabinet to match the speakers.....  :lol:

Peter J

  • Full Member
  • Posts: 1686
  • Hmmmm
Re: X-Statik and X-Voce build
« Reply #5 on: 11 Oct 2021, 10:25 pm »
Thanks Peter - I was a bit worried about that - I'll open up the pass through port for the tweeters a bit further - the recess is a nice 'snug' fit.  I've allowed for the thickness of the veneer, so they should come up 'flush'.  I was also planning to paint the inside of the ports and back of the exposed baffles with black matt rustoleum.  I've seen some people use that here to great effect - I'll plan to do the same with the recesses.

Do you have any thoughts on how to strengthen the screw locations for the various speakers - I was planning to pilot the screw holes then fill with CA (super) glue, so that I can run them in and out a few times, if necessary?

@AlexH - thanks for the encouragement - its slow but steady progress.  I know exactly what you mean about woodworking being addictive - I'm seriously thinking about designing and building my own media cabinet to match the speakers.....  :lol:

The CA glue can be used to good effect but let's clarify. You intend to thread screws in, remove them and fill with glue, correct?  If that's right, all you really want to do is consolidate the wood fibers in the vertical walls of threaded hole so I'd limit to a drop or two so as to just wet the walls. I suspect if you fill the hole, you'll create a hard plug that will deflect screw to side when you go to reinsert after glue solidifies. It also depends somewhat on MDF being used. Pithy core will  be more absorptive than high density. I suspect you could gently run screw in and back out while glue is still wet to eliminate excess. I sometimes use accelerator with CA, but wouldn't in this case and just let it dry overnight.
I'd be inclined to experiment on a scrap to get methodology down pat. Also be aware that bottoming screw in pilot hole or continuing to drive once head contacts panel can just auger out the threads created.  Gentle is the key, methinks, especially with big box MDF.

dryan01uk

  • Jr. Member
  • Posts: 38
Re: X-Statik and X-Voce build
« Reply #6 on: 12 Oct 2021, 12:55 am »
Awesome advice Peter.

'Wet' the thread walls is a great description, as all I want to achieve is a solid core for the screw thread to lock into.  I have sourced MDF from a dedicated local manufacturer - it seems to have a good structure and fibre integrity - but it's still MDF, so fragile if the wrong forces are applied.

'Gentle' is very much the key, as you say - tight but not overly so.

I'm discovering the joys of practice pieces - my tweeter apertures were the result of four practice attempts to get the depths and spacings accurate before cutting the baffles .... :D  I'm going to do the same when I start veneering.

Thanks again - its a great community that exists here - incredibly sharing and helpful.

David