[alexone]

James,

what are the costs for changing the faceplate for (each):

- BCD1
- BDA1
- BP26
- 4BSST


thanx,

al.

[alexone]

James,

what are the costs for changing the faceplate for (each):

- BCD1
- BDA1
- BP26
- 4BSST


thanx,

al.

...and what happens to the exchanged faceplates? would i get 'em back or do they go back to Bryston?

it would be very cool to have 'em home  !

al.

[James Tanner]

^

Hi Alex,

Faceplates vary from $100 US to $300 depending on size.The 4B is 200 and a set of handles is $100.  The BP26 is $100, MPS2 $100 and the 3 knobs are $100.  The DAC and CD Player are $100.

I would not recommend trying to change them in the field though as aligning the leds in the BDA one and the draw and leds in the CD Player is not an easy task. Also to change the amp faceplates you have to remove the heatsinks and disassemble the amplifier to get at the bolts that hold the faceplate on.

james

[alexone]

^

Hi Alex,

Faceplates vary from $100 US to $300 depending on size.The 4B is 200 and a set of handles is $100.  The BP26 is $100, MPS2 $100 and the 3 knobs are $100.  The DAC and CD Player are $100.

I would not recommend trying to change them in the field though as aligning the leds in the BDA one and the draw and leds in the CD Player is not an easy task. Also to change the amp faceplates you have to remove the heatsinks and disassemble the amplifier to get at the bolts that hold the faceplate on.

james

James,

i wouldn't try to do it by myself. i thought the distributor is the one to do it...or is he not?

al.

[James Tanner]

Sun could do it.

james

[1ZIP]

James;

Wow....I'm glad this topic came up!  I was just about to try and do it myself.  The closest dealer to me is Fred's in Portland, OR and I doubt if they would attempt to open a 4B ST.

[danman]

1ZIP I did my 4B-ST myself and it was easy. Mike Pickett from Bryston sent me the instructions and I still have them if you would like to see them.

[1ZIP]

Danman;

Thank you, that's very kind of you.  I'll try and send you a PM.

[qkot]

James, if I want to change a silver 19 inch BP26 to a silver 17 inch do I need to purchase new knobs? I assume they are the same?

thanks

[James Tanner]

James, if I want to change a silver 19 inch BP26 to a silver 17 inch do I need to purchase new knobs? I assume they are the same?

thanks

Knobs are the same.

james

[vegasdave]

James, I still need my dented faceplate replaced. Is it too late?

[James Tanner]

James, I still need my dented faceplate replaced. Is it too late?

Dave - for you anything.

james

[werd]

James, I still need my dented faceplate replaced. Is it too late?

you should use that as your avatar for awhile..... that would be 

[vegasdave]

Dave - for you anything.

james

haha. That's good to know!    

[Stu Pitt]

haha. That's good to know!    

Dave - ask him to send me a BDA-1, free of charge.

[vegasdave]

Dave - ask him to send me a BDA-1, free of charge.

Ok! haha.