BDP-2 S2.16 2015-06-19
Drives: Internal=Samsung EVO 840 1TB SSD External=Crucial 500GB SSD in an un-powered enclosure.
Chris:
Was testing out a demo AES cable and decided to put the old one back in the system. Powered down the BDP, powered down the DAC then changed cables. When the BDP was powered back up it took longer than normal, ( probably the 2 minutes described in the manual ), after which the error 009 displayed. I could not see whether the DAC locked or not as it was off. Unplugged and re-plugged the BDP and it booted normally.
Other things that probably have no bearing, but I'll mention anyway. MPAD was running with a playlist up, but stopped, when the first boot was attempted. Also we have had a couple short, 1 second or so, power outages in the last couple weeks requiring an unplug - re-plug of the BDP.
I looked at the System Log, but could only see the MPD log; The drop-down did not display any other options.
Should I be concerned at the display of 009 at this point?
Thanks, Rich