[mgalusha]

It was said to me "these are like stats with balls".  I didn't really understand what that meant until I heard them.  Now it makes sense but I'll add that they have the great things about stats but without the negatives.

Funny, the first time my audio buddy Jerry heard mine he made that very statement and he's owned several stat's and other planar speakers.

Glad you enjoyed your visit with Anand, I have no doubt the system sounded as you describe.

[jtwrace]

To the Abbey owners what height stands do you use? 

I'm 5' 9" with typical height proportion (i.e. not super long torso).  If I could only say the same on width...

[dwr]

Jason, my stands are 19 1/2" I built my own. I came about that size because I wanted the center of the waveguide at the same level as my ears when in the listening seat. In my chair my ears are 41" off the floor thus the 19 1/2" stand puts the center of the waveguide 41" off the floor. I played around with different size stands from 18 - 21" high. In my room when I get above the 19 1/2" mark the image gets too high for my preference. When you were listening yesterday did you notice if the image was at waveguide level or above or below that level at all. In my room the image appears about 4 -6" above the plane of the waveguides. 

[jtwrace]

Jason, my stands are 19 1/2" I built my own. I came about that size because I wanted the center of the waveguide at the same level as my ears when in the listening seat. In my chair my ears are 41" off the floor thus the 19 1/2" stand puts the center of the waveguide 41" off the floor. I played around with different size stands from 18 - 21" high. In my room when I get above the 19 1/2" mark the image gets too high for my preference. When you were listening yesterday did you notice if the image was at waveguide level or above or below that level at all. In my room the image appears about 4 -6" above the plane of the waveguides.

OK.  I know that Anands stands are 14" tall.  I would say that the image was below.  I would prefer it to be a bit higher.          It was really good.

[dwr]

One thing you can do when you get the speakers is pick up a pair of the little stand/table that Ikea sells for like $12 a piece they are exactly 18" tall and the Abbeys fit well in them, you can raise them by shimming them to try different and find the size that suits your needs.

Dan

[jtwrace]

One thing you can do when you get the speakers is pick up a pair of the little stand/table that Ikea sells for like $12 a piece they are exactly 18" tall and the Abbeys fit well in them, you can raise them by shimming them to try different and find the size that suits your needs.

Dan

That's good to know.    

I was going to get nuts and make an aluminum version that I was able to easily change the height.  I had the design all done in my head but it will be way to expensive.  I can't justify 30% cost of the Abbey in the stand.   

[dwr]

Yeah I don't remember the damned name of the Ikea piece but here is a pic of one, and no they don't come in that lovely yellow, my wife painted them that color she uses them in her photography room.

[mgalusha]

My stands are about 18" and like Dan, configured them put the center of the WG at about my ear level. I originally had them at 24", which put the midpoint of the speakers about ear level. I found the images a bit high for my liking as well.

[poseidonsvoice]

Okay, I'm feeling a bit better about this now.

My stands are about 15 inches. But when you measure my ear to the floor and measure the center of the waveguide to the floor, they measure about the same. Still a couple inches taller will probably tweak the soundstage a little better. I'm about 5ft 9 inches tall. I know that Mike and Tom are big 6 footers right?

Anand.

[mgalusha]

I know that Mike and Tom are big 6 footers right?

I'm 6'2" and I suspect Tom is about the same. I'm one of those long torso types but my listening throne is not real high, works out well for me.

[dwr]

Yes I am 6'1" so yeah you sound like you are doing about the same Anand, the measurement that matters is the one to where YOUR ears are from the floor. As Mike did I had mine higher initially as it was recommended that the center point of the front baffle be at ear level and that put the image too high for my liking.

Dan

[DougSmith]

20" stands here.

[poseidonsvoice]

Wow! I feel like a midget 
Anand.

[dwr]

Nah Anand, once we are all sitting in our respective chairs its all a moot point!!

Dan

[jtwrace]

Based on all of this I'd say 17" or maybe 18" with the spikes and decouplers from stand to Abbey would be sweet. 

My ears are ~37" at the listening position.

[JDUBS]

One thing you can do when you get the speakers is pick up a pair of the little stand/table that Ikea sells for like $12 a piece they are exactly 18" tall and the Abbeys fit well in them, you can raise them by shimming them to try different and find the size that suits your needs.

Dan

Dan, what are the top dimensions?

Jim

[dwr]

Hi Jim, the top dimensions are 13 3/4" front to back and 14" across. They will take a good amount of weight too. It held all of my 230 lb lard butt with no trouble.

Dan

[TomS]

My new stands are at about 20".  Floor to my ears is 39".  I am 6'2" and my Ekornes sits a bit low so it all works out just right for me.

[poseidonsvoice]

My new stands are at about 20".  Floor to my ears is 39".  I am 6'2" and my Ekornes sits a bit low so it all works out just right for me.

I'm curious, which Ekornes do you have?

Anand.

[TomS]

I'm curious, which Ekornes do you have?

Anand.

Vegas, cuz I'm a big guy, with the Royalin leather.  Expensive but worth every penny...  Don't know why I waited so long.