ob servo subs

0 Members and 1 Guest are viewing this topic. Read 1594 times.

mmmanich@comcast.net

ob servo subs
« on: 5 May 2010, 12:50 pm »
What are the benifets or drawbacks of the two differant types of cabinets for the ob servo subs? I've seen people build them in the h-frame and the w-frame. This sub will be used for mostly 2 channel along with a set of ob 7's. It will do some 5.1 duty. these will be paired with an emo,umc1and an ips1.

thank
marty

TRADERXFAN

  • Full Member
  • Posts: 1062
  • Trillions will vanish... it's a debt blackhole.
    • GALLERY
Re: ob servo subs
« Reply #1 on: 5 May 2010, 01:27 pm »
Height and width differences mainly

Voiceray

  • Jr. Member
  • Posts: 34
Re: ob servo subs
« Reply #2 on: 5 May 2010, 10:56 pm »
What are the benifets or drawbacks of the two differant types of cabinets for the ob servo subs? I've seen people build them in the h-frame and the w-frame. This sub will be used for mostly 2 channel along with a set of ob 7's. It will do some 5.1 duty. these will be paired with an emo,umc1and an ips1.

thank
marty

Resonance Issue

But probably not with the plan at 80 Hz.

Here is an old discussion on it.

http://www.audiocircle.com/index.php?topic=54875.0

Danny Richie

Re: ob servo subs
« Reply #3 on: 7 May 2010, 01:19 am »
The H frame breaks it up better with bracing as the baffle is right up the center.

The W frame has slightly larger diagonal areas and the whole top that can't be braced.

And yes these woofer do put some pressure on the side panels.