Hey Danny! Check out the NEW N3 PICS!!! NEW PRICING 12/05/2010

Outofthewoods · « **Reply #20 on:** 24 Apr 2010, 10:30 pm »

Quote from: drphoto on 23 Apr 2010, 11:43 pm

Really nice. Love to see what you could do w/ the Venue design. Those curved side panels open up a lot of ideas. Your anthracite grey w/ gloss finish burl walnut sides would be a classic. Probably cost a fortune though.

Thank You!

We've actually got some design ideas in the works for the Venues!

Your veneer and paint combination idea sounds like it would make for a very beautiful speaker.

Outofthewoods · « **Reply #21 on:** 24 Apr 2010, 10:39 pm »

Quote from: toddbagwell on 24 Apr 2010, 12:08 pm

I've been doing well, just really busy with work. I'll try to post a few pics of the listening room soon, looks really nice with some decorations. I'll PM you in the next month or two to hammer out some details about the cabinets. AI'd love to call dibs on that gallon of paint, but I know that money talks (and rightly so) and if we need to use something similar we can. Right now I have no desire to go to more than two channels. It sounds so good now i know a screen and more speakers would have to ruin it!

Later, Todd

Can't wait to see how that room has come along!

Hope your getting to set aside some time out of your busy schedule to enjoy your new setup.

No worries on the paint man, I can order more at any time.

Take Care!

Ruben

chip · « **Reply #22 on:** 24 Apr 2010, 11:54 pm »

How about a straight on shot front side?

Outofthewoods · « **Reply #23 on:** 25 Apr 2010, 12:42 am »

Quote from: chip on 24 Apr 2010, 11:54 pm

How about a straight on shot front side?

You got it!

Outofthewoods · « **Reply #24 on:** 25 Apr 2010, 04:37 pm »

I almost forgot to mention that Sean "The Ninja", "Parque" Ries is building the networks for these!!!

Also, we will soon be releasing pricing information on enclosure and build options that are aimed at meeting a wide range of budget requirements! These options will include the choice to purchase the finished enclosures by themselves and unfinished enclosures too.

Veneered enclosure pricing and options will be posted shortly as well!

Thanks,

Ruben

Danny Richie · « **Reply #25 on:** 25 Apr 2010, 09:13 pm »

Man those really look good!

Plund · « **Reply #26 on:** 26 Apr 2010, 12:08 pm »

Ruben, the "WOW" factor on your finish is extremely high! Nice, nice!

The Ninja · « **Reply #27 on:** 26 Apr 2010, 10:46 pm »

I saw these in person. Absolutely killer. Well done Ruben!

Outofthewoods · « **Reply #28 on:** 30 Apr 2010, 03:07 am »

Quote from: Danny on 25 Apr 2010, 09:13 pm

Man those really look good!

Thanks Danny.

They're on their way!

Outofthewoods · « **Reply #29 on:** 30 Apr 2010, 03:45 am »

Quote from: Plund on 26 Apr 2010, 12:08 pm

Ruben, the "WOW" factor on your finish is extremely high! Nice, nice!

Thanks Plund!

Outofthewoods · « **Reply #30 on:** 30 Apr 2010, 03:50 am »

Quote from: The Ninja on 26 Apr 2010, 10:46 pm

I saw these in person. Absolutely killer. Well done Ruben!

Thanks Sean!

I'll be bringing those Blackberry Met. N3's up to your place for a complete build out real soon.

tortoiseman2542 · « **Reply #31 on:** 30 Apr 2010, 01:08 pm »

Man I wish I lived out there and not in Ohio. I would love to see those up close and personal. Well done Ruben!

Robert

saisunil · « **Reply #32 on:** 30 Apr 2010, 01:19 pm »

... this is it!

As you know a few people have come and gone trying to build enclosures for Danny's kits ...

I hope you get a sustainable business model squared away ... to match your excellent work based on super high value and high performance speaker design!

All the best!
Sunil

Outofthewoods · « **Reply #33 on:** 2 May 2010, 01:18 am »

Hey Guys!

Here are some shots of the Blackberry Metallic.

These pictures DO NOT do this color justice. The enclosures literally looks like they're made of blackberry candy.

When lighting conditions are low, it looks...well...black, but once you get some good lighting bouncing off of the color flake, IT'S SHOW TIME!!!

That last shot was just for fun.

Okay, back to work!

Outofthewoods · « **Reply #34 on:** 2 May 2010, 01:23 am »

Quote from: tortoiseman2542 on 30 Apr 2010, 01:08 pm

Man I wish I lived out there and not in Ohio. I would love to see those up close and personal. Well done Ruben!

Robert

Thanks Robert!

I know what you mean man. Pictures just don't compare to up close and personal.

Danny Richie · « **Reply #35 on:** 2 May 2010, 02:04 am »

Wow, that is a great looking color!

Outofthewoods · « **Reply #36 on:** 2 May 2010, 02:14 am »

Quote from: saisunil on 30 Apr 2010, 01:19 pm

... this is it!

As you know a few people have come and gone trying to build enclosures for Danny's kits ...

I hope you get a sustainable business model squared away ... to match your excellent work based on super high value and high performance speaker design!

All the best!
Sunil

Thanks Sunil!

We will surly give it our best.

Outofthewoods · « **Reply #37 on:** 3 May 2010, 12:03 am »

Quote from: Danny on 2 May 2010, 02:04 am

Wow, that is a great looking color!

Nice, isn't it?!

Here's a few shots of the Pyrite Mica.

Once again, these pictures don't do the color justice.

NOTE: Our standard colors were chosen for their versatility and have the ability to mesh well with a broad range of interior decor. If anyone is interested in a color sample please shoot me a PM and we'll get one out to you asap.

Thanks!

Danny Richie · « **Reply #38 on:** 3 May 2010, 12:06 am »

Dang those look good. Nice touch on the edges too.

jr1414 · « **Reply #39 on:** 7 May 2010, 02:15 am »

Those are some beautiful enclosures there. Just curious, have you worked up pricing yet? Also, would you offer a cabinet with a forward facing port for placement closer to boundaries. Thanks.