
What’s included:
Maverick Audio Tube Magic DAC
User’s quick start guide
Line-in cord for most iPod and other MP3 players with standard 3.5 mm jack
USB cable
1/8″ (3.5mm) to 1/4″ (6.5mm) gold plated headphone jack converter
AC Power Cord
Audio inputs
Optical audio input x 1 (Digital)
Coaxial audio input x 1 (Digital)
USB connector x 1 (Digital)
Analog audio input x 1 (Analog)
Line-in audio input x 1 (Analog)
Optical connector: TOSLINK 660nm
Coax connector: RCA, 500mVpp into 75 ohms
Analog connector: RCA, 1000k ohms
Accepted sample rates: 32khz, 44.1Khz, 48Khz, 88.2Khz, 96Khz
Accepted audio format: linear PCM, 16, 20 or 24 bits per sample
Audio outputs:
All RCA connectors are gold-plated
Volume control is provided for all outputs
Two dedicated linear power regulators for DAC and line-out stages
Dedicated linear power regulators for Tube stage
Analog RCA outputs signal-to-noise ratio: >96dB
Tube pre-out outputs signal-to-noise ration: >90dB
Total harmonic distortion: less than 0.001% (RCA outputs), less than 0.1% (Tube pre-out outputs)
Maximum output power: 1000mW x 2 (32 ohms), 500mW x 2 (300 ohms), 300mW x 2 (600 ohms)
Headphone outputs:
Standard 1/4″ jack
Minimum headphone impedance: 16 ohms
Maximum headphone impedance: 600 ohms
Headphone output power: 300mW ~ 1000mW
Power:
R-core Linear 110/220 manual switch
Physical:
Dimensions: 10″W x 2.1″H x 6.5″D (260mm x 55mm x 167mm)
Finish: brushed aluminum in black color
5-foot gold plated RCA audio cable
5-foot Toslink/Optical Cable
5-foot gold plated headphone jack to RCA cable
1/8″ (3.5mm) to 1/4″ (6.5mm) gold plated headphone jack converter