Picture Food Needed

0 Members and 2 Guests are viewing this topic. Read 443372 times.

James Tanner

  • Facilitator
  • Posts: 20669
  • The Demo is Everything!
    • http://www.bryston.com
Re: Picture Food Needed
« Reply #1600 on: 21 Oct 2014, 03:29 pm »
My 5 year old grandson playing Hide-And-Seek with me.   :lol:



james

Laundrew

  • Full Member
  • Posts: 5185
  • "Sometimes it rains inside my head..."
Re: Picture Food Needed
« Reply #1601 on: 21 Oct 2014, 09:11 pm »

Laundrew

  • Full Member
  • Posts: 5185
  • "Sometimes it rains inside my head..."
Re: Picture Food Needed
« Reply #1602 on: 21 Oct 2014, 09:36 pm »
Very sorry to hear about this, Laundrew, and especially the impact on you and Lady Laundrew. Debatably, we seem to be in a second age of the Robber Barons, with more tightly consolidated business interests trumping social and quality of life issues. Clearly, there are complex and controversial issues affecting such matters, but there are companies that seem to be doing just fine by honoring local craftsmanship.


Rich
________________
Whiney Napa Valley


Thanks Rich, it is the working couples that were both employed in this plant that my heart goes out to. It would seem that gone are the days when an individual could find a decent paying job in manufacturing with only high school and you can really notice how the middle class is being decimated in Ontario by this. I honestly do not know what is in store for our younger generation, they are going to be worse off than their parents - speaking with an individual today who was telling me that they are having trouble keeping on top of their hydro bills.

One of the benefits of not getting out much and staying mostly in a dark basement is that you don't burn that much electricity - that is, until you turn the beasties on  :lol: :duh:




Be well....

PRELUDE

Re: Picture Food Needed
« Reply #1603 on: 22 Oct 2014, 03:24 am »



Laundrew

  • Full Member
  • Posts: 5185
  • "Sometimes it rains inside my head..."

PRELUDE

Re: Picture Food Needed
« Reply #1605 on: 22 Oct 2014, 09:06 pm »
https://www.youtube.com/watch?v=xzkWTcDZFH0

Be well...
I wish That I could be there and enjoy the show live. :thumb:



Jimmy71

  • Jr. Member
  • Posts: 70
Re: Picture Food Needed
« Reply #1606 on: 28 Oct 2014, 11:58 am »
A New 2014 GMC Acadia




Robert

Hi mr Robert I have seen a picture you have posted with 2 4bsst2 do you use them as mono and what do you think if I use tmrm as mono please tell me your opinion thanks

Robert D

Re: Picture Food Needed
« Reply #1607 on: 31 Oct 2014, 12:33 am »


I'm Vertical Bi-amping My 4Bsst2's They are Stereo Amplifiers
Not Mono Amplifiers.....
I’m balanced out from Bp26
 1 4bsst2 to left channel  bi wired
 1 4bsst2 to the right channel bi wired

Sound presentation is the difference. Clean and split as the recording studio’s meant them to be listened to.

Regards Robert




turnovertherecord

  • Jr. Member
  • Posts: 244
  • rain,fog,snow,sun,known to happen on the same day
Re: Picture Food Needed
« Reply #1608 on: 31 Oct 2014, 12:41 am »
Did you use a splitter

I bi amp my 3bsst and bp-25mc

The pre only has one balanced out,,,,

and

Two single ended out

I am using 6 ft balanced Y cables  also tried them both ways and found that balanced worked for me

also tried them bridged into 10 ohm speakers which the amps see 5 ohms,,,did not like so much
« Last Edit: 5 Nov 2014, 08:00 pm by turnovertherecord »

Robert D

Re: Picture Food Needed
« Reply #1609 on: 31 Oct 2014, 12:37 pm »
I do not use a splitter
Here are some pointers that I found on the Net.

Bi-wiring can improve clarity and openness, with less grain and more solidity
to the bass. Two cables are required for each speaker that you bi-wire.
Bi-amp
Passive bi-amping offers a dramatic improvement in clarity, openness and
detail, with much better bass solidity and definition. The presentation of music
and movie soundtracks is simply more intelligible and transparent.
With passive bi-amping, the speaker’s internal passive crossovers remain
connected. An external electronic crossover is not required and cannot be
used (there is no direct electrical access to individual drive units). This saves
expense and setup difficulties. Passive bi-amping optimizes your speaker to
achieve the best possible high-end performance. To bi-amplify, two power
amplifiers are required. Connection can be either vertical or horizontal.
IMPORTANT! When bi-amping, always use amplifiers with identical gain.
If uniform amplifier gain is not maintained the speaker-to-speaker balance
will be incorrect when vertically bi-amped, or the speaker system’s frequency
balance will be incorrect when horizontally bi-amped. To prevent problems
use identical amplifiers (Brand and Model) and in identical operating modes
(single channel or bridged).
Vertical Bi-amplification dedicates one amplifier to each speaker. This
configuration provides complete channel separation, which optimizes your
system’s imaging ability. Connect your speakers to one amplifier at a time.
Horizontal Bi-amplification dedicates one amplifier to your speakers’ mid/
low-frequency inputs and another to their high-frequency inputs. This configuration
can maintain better clarity when listening at loud levels—if lowfrequency
demands cause amplifier clipping, distortion will still be kept away
from high-frequency drivers.

Regards Robert



Laundrew

  • Full Member
  • Posts: 5185
  • "Sometimes it rains inside my head..."
Re: Picture Food Needed
« Reply #1610 on: 2 Nov 2014, 12:31 am »



A most Happy Dia de los Muertos  :D

Be well...

Jimmy71

  • Jr. Member
  • Posts: 70
Re: Picture Food Needed
« Reply #1611 on: 2 Nov 2014, 11:16 am »
My 5 year old grandson playing Hide-And-Seek with me.   :lol:



james
Hi James what do you think about Robert D's bi amping his speakers? Since you have a lot of experience on that. I have a 4bsst2 thinking of doing the same.

Jimmy71

  • Jr. Member
  • Posts: 70
Re: Picture Food Needed
« Reply #1612 on: 2 Nov 2014, 11:18 am »
I do not use a splitter
Here are some pointers that I found on the Net.

Bi-wiring can improve clarity and openness, with less grain and more solidity
to the bass. Two cables are required for each speaker that you bi-wire.
Bi-amp
Passive bi-amping offers a dramatic improvement in clarity, openness and
detail, with much better bass solidity and definition. The presentation of music
and movie soundtracks is simply more intelligible and transparent.
With passive bi-amping, the speaker’s internal passive crossovers remain
connected. An external electronic crossover is not required and cannot be
used (there is no direct electrical access to individual drive units). This saves
expense and setup difficulties. Passive bi-amping optimizes your speaker to
achieve the best possible high-end performance. To bi-amplify, two power
amplifiers are required. Connection can be either vertical or horizontal.
IMPORTANT! When bi-amping, always use amplifiers with identical gain.
If uniform amplifier gain is not maintained the speaker-to-speaker balance
will be incorrect when vertically bi-amped, or the speaker system’s frequency
balance will be incorrect when horizontally bi-amped. To prevent problems
use identical amplifiers (Brand and Model) and in identical operating modes
(single channel or bridged).
Vertical Bi-amplification dedicates one amplifier to each speaker. This
configuration provides complete channel separation, which optimizes your
system’s imaging ability. Connect your speakers to one amplifier at a time.
Horizontal Bi-amplification dedicates one amplifier to your speakers’ mid/
low-frequency inputs and another to their high-frequency inputs. This configuration
can maintain better clarity when listening at loud levels—if lowfrequency
demands cause amplifier clipping, distortion will still be kept away
from high-frequency drivers.

Regards Robert
I have a bp26 and a 4bsst2 how do you connect the pre to the 2 amps? And then the amps to the speakers?

turnovertherecord

  • Jr. Member
  • Posts: 244
  • rain,fog,snow,sun,known to happen on the same day
Re: Picture Food Needed
« Reply #1613 on: 5 Nov 2014, 06:21 pm »
Will you use balanced or single ended

If balanced you will need a splitter (Y cable )

If single ended than there is enough outputs to do the job

Use one amp for 1 speaker bi wire (vertical bi amp )

Use 1 amp to power the tweeter of both speakers same with woofer ( horizontal bi amp )

turnovertherecord

  • Jr. Member
  • Posts: 244
  • rain,fog,snow,sun,known to happen on the same day
Re: Picture Food Needed
« Reply #1614 on: 5 Nov 2014, 06:28 pm »
Picked up another pre and amp this week




So There

  • Jr. Member
  • Posts: 257
  • Brystonized
Re: Picture Food Needed
« Reply #1615 on: 6 Nov 2014, 01:06 am »
Congratulations! What a great choice of gear.  :thumb:

What are you using them with? Please let us know how you're enjoying them.

Happy listening,

Rich
________________
Whiney Napa Valley

turnovertherecord

  • Jr. Member
  • Posts: 244
  • rain,fog,snow,sun,known to happen on the same day
Re: Picture Food Needed
« Reply #1616 on: 6 Nov 2014, 02:17 am »
Have two 3bsst`s bi amp focus audio fs-788 with a bp-25mc

Purchase a bp-25da and a 4bsst2 this week

will sell the 25mc and the 2 3b`s

The sale will fiance a vpi prime and audio research ph5

DEV

Re: Picture Food Needed
« Reply #1617 on: 9 Nov 2014, 06:29 pm »



turnovertherecord

  • Jr. Member
  • Posts: 244
  • rain,fog,snow,sun,known to happen on the same day
Re: Picture Food Needed
« Reply #1618 on: 10 Nov 2014, 12:48 pm »
 very nice path you have taken

redbook

  • Full Member
  • Posts: 1237
  • the music is the blood...........
Re: Picture Food Needed
« Reply #1619 on: 13 Nov 2014, 12:18 am »



  Not an  LP fan but thought some would like this shot  of the labels we all grew up with. :thumb: