New Super-V model (that is going to the show) with pics!

Danny Richie · « **Reply #120 on:** 3 Sep 2010, 09:25 pm »

Quote from: Abelma on 3 Sep 2010, 08:46 pm

Ok, I see the configuration issue. Which subwoofer amplifier model are you using for this Kit?

You get a pair of the A370PEQ's.

Abelma · « **Reply #121 on:** 4 Sep 2010, 05:44 am »

Thx Danny....The 370PEQ is an stereo amp. There is two in the kit ? One for each speaker?

Danny Richie · « **Reply #122 on:** 4 Sep 2010, 03:59 pm »

Quote from: Abelma on 4 Sep 2010, 05:44 am

Thx Danny....The 370PEQ is an stereo amp. There is two in the kit ? One for each speaker?

There are two of them included in the kit, but those are mono amps. So one for the subs on each speaker.

Abelma · « **Reply #123 on:** 4 Sep 2010, 04:27 pm »

Sorry Danny, I don't understand. In your web site where I can see the A370PEQ, I can see in the picture L and R input and outputs.
May be your are talking about other product that is not in your web site?

AUDFILE74 · « **Reply #124 on:** 4 Sep 2010, 04:59 pm »

Hello Abelma, The a370peq is a mono amp as decribed. what some people like to do is use one powered subwoofer but connect both the left and right channels to the single subwoofer. the a370peq is designed so this can be done. the main benefit is ease of blending into a system. down the road a person may want to run 2 subs so all they would do is use one of either the left or right inputs(it doesn't make a difference) and dial the 2 subs in and start enjoying two subs. ihope this clears things up.

Abelma · « **Reply #125 on:** 4 Sep 2010, 05:04 pm »

Thank you...Never had a subwoofer and nor look closer, so it is new for me. Now ok, thank you for your assistance.

jtwrace · « **Reply #126 on:** 29 Sep 2010, 07:30 pm »

I'm still begging for the info on the Super V to be on your website. Please!

Rob S. · « **Reply #127 on:** 30 Sep 2010, 02:44 am »

yep, i'm thinking the same thing... I dug up the kit price of 2495 from way back in beginning of this thread, 9/09.

Would love to hear any of these, whether V1, V2 or the super V. Anyone in OH, or VA or NC with one of these built up?

Wonder how much more money for the build cost of the enclosure....

Rob S.

Danny Richie · « **Reply #128 on:** 30 Sep 2010, 03:04 am »

The last time that I had a weekend that I wasn't covered up, I got all of the V-2 info up on the site. I might be able to get the V-1 and Super-V stuff up once I get RMAF behind me.

PDR · « **Reply #129 on:** 30 Sep 2010, 04:27 am »

The cost of my V-1s in materials was very little......perhaps $250......
But there was a lot of hrs.......but thats the fun part, where the DIY comes in.

Abelma · « **Reply #130 on:** 30 Sep 2010, 04:44 am »

Hi. What do you compare the Paudio coax driver to a good full range as Lowther or Fostex? Thx

PDR · « **Reply #131 on:** 30 Sep 2010, 02:57 pm »

Every winter I do a project build......this winter its going to be a
horn......Have chosen http://www.wodendesign.com/maeshowe.htmlfor this years fun.
Uses the MA CHR70, have heard really great things about this design.
By Christmas I should be able to let you know how it stacks up against the V-1

Perry

jtwrace · « **Reply #132 on:** 30 Sep 2010, 03:01 pm »

Quote from: PDR on 30 Sep 2010, 02:57 pm

Every winter I do a project build......this winter its going to be a
horn......Have chosen http://www.wodendesign.com/maeshowe.htmlfor this years fun.
Uses the MA CHR70, have heard really great things about this design.
By Christmas I should be able to let you know how it stacks up against the V-1

Perry

Cool. It's not going to have the bottom end, that's for sure!

Tyson · « **Reply #133 on:** 1 Oct 2010, 03:35 am »

I hope your experience with full range drivers is better than mine have been.

Guy 13 · « **Reply #134 on:** 1 Oct 2010, 03:45 am »

Quote from: PDR on 30 Sep 2010, 04:27 am

The cost of my V-1s in materials was very little......perhaps $250......
But there was a lot of hrs.......but thats the fun part, where the DIY comes in.

Hi.
Here in Vietnam labor is super cheap (5-8 USD a day) and raw material from Asia is also cheap. That being said, my V-1 cost me 260 USD/pair for parts and labor.

Guy 13.

jtwrace · « **Reply #135 on:** 1 Oct 2010, 12:02 pm »

Quote from: Guy 13 on 1 Oct 2010, 03:45 am

Hi.
Here in Vietnam labor is super cheap (5-8 USD a day)
Guy 13.

It would be nice for you to add yourself to this thread. http://www.audiocircle.com/index.php?topic=79617.msg842910;topicseen#new

Abelma · « **Reply #136 on:** 14 Oct 2010, 08:05 pm »

Hi Danny....How you compare the Paudio BM12CX38 against a good fullrange driver as Supravox or other, in the mid range area? Thx

Danny Richie · « **Reply #137 on:** 21 Oct 2010, 04:27 pm »

Quote from: Abelma on 14 Oct 2010, 08:05 pm

Hi Danny....How you compare the Paudio BM12CX38 against a good fullrange driver as Supravox or other, in the mid range area? Thx

I really like the P-Audio driver.

Rocket_Ronny · « **Reply #138 on:** 21 Oct 2010, 04:40 pm »

Hey Perry:

Regarding:

Quote

Every winter I do a project build......this winter its going to be a
horn......Have chosen http://www.wodendesign.com/maeshowe.htmlfor this years fun.
Uses the MA CHR70, have heard really great things about this design.
By Christmas I should be able to let you know how it stacks up against the V-1

Don't waste your time, really. The V1s will absolutely DESTROY them. There is no way the Fostex 126 can compete with the speed of the PAudio. And bass, well forget it. Even in those cabinates.

Just some friendly advise from your neighbor.

Let me know when your room is done as I would like to have a listen.

Rocket_Rocky Mountain House, AB._Vaillant

Mariusz · « **Reply #139 on:** 21 Oct 2010, 05:14 pm »

Not Fostex but Mark Audio and it should be something different. I would say TRY it!