The Neo-1 is made available as a lower cost version of the other two new models, the Neo-1X and the Neo-2X. Both of those other models use the X series woofers. It uses the standard M-130 and new deep back cup Neo3pdr.
It is shown here in the smaller of the PE curved boxes.
The basic kit will be $289.
This includes the same 2" port that comes with our A/V-1 kit (not the flared port from PSP). It comes with Erse inductors, Lynk resistors, Erse poly caps, and Sonicap Gen.2 by-pass cap in the tweeter circuit. This also uses the GR Research standard binding post cups and NOT the vampire posts shown in the pic.
Upgrade options are as follows:
All Sonicaps throughout and Mills resistors, add $100.
Sonicaps and Mills resistors in the tweeter circuit only, plus a by-pass cap for the woofer circuit, add $75.
Vampire wire binding post (BP1.5 Hex) add $31.50 See more info on those here:
http://vampirewire.com/pc-48-16-binding-postbrbp15hex.aspx I may make the solid Copper Cardas binding posts available as well.
JPS Labs internal wire, add $42. More info here:
http://www.audiocircle.com/index.php?topic=53822.01 sheet of No Rez add $38. This will cover a pair of small cabinets.
These speakers measured incredibly well especially in the off axis. Here are the crossover responses. Sensitivity is a little better with the standard M-130 woofer than the other to new models using the X series woofers.
On axis, 10, 20, 30, and 40 degrees off axis.
This one is truly exceptional. It is the vertical off axis measurements. Shown here is on tweeter axis, 6, 12, and 18 degrees above tweeter axis.
Spectral decay is really clean too.
And the impedance sweep.
