RAD Micros in the house!

JoshK · « **Reply #20 on:** 9 Feb 2004, 11:13 pm »

no baffle step circuit

JohnR · « **Reply #21 on:** 9 Feb 2004, 11:22 pm »

Oh. In that case perhaps stuffing the port will tell you if that's the problem.

I have mine heavily stuffed and tuned quite low to get an "EBS" type of response

Brian Bunge · « **Reply #22 on:** 10 Feb 2004, 03:29 pm »

John,

Did you finally get some 871's in? I'm afraid to ask what your EBS alignment looks like.

JohnR · « **Reply #23 on:** 10 Feb 2004, 07:36 pm »

They're monsters

Actually I just swapped in the 871s for the 881s I had in these boxes before

http://www.audiocircle.com/index.php?action=gallery;area=browse;user=3

Sound good

Brian Bunge · « **Reply #24 on:** 10 Feb 2004, 07:56 pm »

I assume they were a significant improvement over the 881's? Are the cabinets sealed or vented? In my experience 'EBS' assumes a vented enclosure but I also assume you're just pulling our legs too!

JohnR · « **Reply #25 on:** 10 Feb 2004, 08:32 pm »

The port is built into the back of the cabinet, and exits right at floor oops I mean desk level

3.5L tuned to 62 Hz, not really an EBS but it kinda looks like one - ? Anyway it works

Brian Bunge · « **Reply #26 on:** 10 Feb 2004, 08:49 pm »

EBS or rollercoaster. I'm not sure which!

JohnR · « **Reply #27 on:** 10 Feb 2004, 08:56 pm »

?

Did you model it? Don't forget the stuffing.

Brian Bunge · « **Reply #28 on:** 10 Feb 2004, 08:59 pm »

Yes I did, and no I didn't! BTW, do you still need Unibox 3? Can't you download it from the site?

JohnR · « **Reply #29 on:** 10 Feb 2004, 11:26 pm »

It's not available for download anymore, as far as I can see

I'll send you a PM