Yes George
We are just getting everything ready for them in the next week to publish all the info for the HT8.
Our new HT8 will come out of the box as complete as we can offer a pair of speakers.
From the ground we have SoundFusion spikes which are Vibe Buster 8 is an audiophile quality, adjustable 3/4" O-ringed solid brass spike, which is threaded into proprietary base molded from specially formulated nylon.
The base was specifically made from specially formulated nylon and not from any other material to completely eliminate any vibrations, which can occur between base and the spike. Furthermore, to ensure complete neutrality, an O-ring was added and is placed into a special O-ring chamber in the nylon base.
The height of adjustment of the spike is up to 1/2" (1.3 cm). The brass spike, nylon base and the O-ring work in conjunction to ensure complete elimination of vibration in any point of adjustment.
Adjusting Rod Included with Vibe Buster 8 is a 4" long, 3/16" diameter stainless steel rod, which is used to precisely adjust the spike by hand-turning. This stainless steel rod functions as a stopper to protect the brass spike from threading beyond the 1/2" (1.3 cm) adjusting limit. The base of Vibe Buster 8 can be attached to any audio component regardless of the material the component is constructed from. Included are self tapping screws for wooden surfaces as well as double-sided foam tape gaskets, precisely die-cut to the shape of the nylon base, for adhesion to any other surface?
These spikes go into 30mm thick bases with a satin black finish flush to the front and rear of the speakers with 2" on each side for stability.
Cabinets are braced every 6" we have done this as the sleek look requires 3/4" MDF to keep the size to 7" in width for the HT8 the same slim look as the HT3.But using 3/4" MDF we did not want any resonation issues so we have done bracing every 6" threw the cabinet.
The bottom plate of the cabinet is 30mm for a thick plate to have threaded inserts installed for attaching the bases to.
Hand matching drivers for each pair of finished HT8 from the twin 6.8" drivers on the side of each cabinet. Having the drivers and able to match 4 drivers the same is time consuming but well worth the time we put into our product.
The same is done for matching drivers for the mid's as well we match and have 4 the same this makes both pair of speakers the same for drivers.
Lining our cabinets we line the HT8 with our RAW ICE material for acoustic absorbtion.This material is covered on all the walls of the MTM and the exposed walls of the Woofer compartment.
Crossover components.
Pure Sonicap no poly no electric caps used.
Platinum bypass cap on each Sonicap threw the HT8 crossover.
Inductors we have wound for us and check each inductor and dewind if needed to have a small tolerance
Assembled with a burn in time of 7 days after the speakers are complete.
Finish is coming on the HT8 as a standard Ball Sapele with other finishes as option for addition charges.
PRE ORDER Price for the HT8 including shipping $4999.99
And for the first 4 orders we will be putting in a little bonus.
Free pair of RAW FR in Quilted Maple, Koa, Wenge , Waterfall Makore.
This special is a limited time frame on the first 4 pair sold along with the FREE RAW FR speaker’s one pair in each finish.
Pictures of the HT8 finished in Lacewood and the Koa FR we had at CES.
