APEX C coming

RAW · « **on:** 2 Nov 2005, 01:46 am »

For those looking for a center channel to match the large Apex.
This is under works and will be ready in a few weeks time.
Using the WWMTMWW of the Apex but compressing the MTM to a T above the MM in the middle.

Tuning will be front or rear ported versions as well as sealed.

Small foot print of 11" height 44" width by 15.5" depth

Pictures will come in the next day.

Frequency response for the Apex C then below is the FR in room for the Apex C.

Bingenito · « **Reply #1 on:** 2 Nov 2005, 04:39 am »

You forgot to mention that is doubles as a subwoofer

RAW · « **Reply #2 on:** 2 Nov 2005, 04:41 am »

Yes to say the least

With the photos and a few measurments this center channel can replace a few mains as well.

Bingenito · « **Reply #3 on:** 2 Nov 2005, 04:46 am »

Do you plan to offer a matching stand for this beast? I sure hope so because I would hate to see that on top of the average TV

RAW · « **Reply #4 on:** 2 Nov 2005, 04:53 am »

SSSSHHHHHH.

Custom center stand as well.
Yes that is under the table!

A center channel that is tuned to 27hz

trekker · « **Reply #5 on:** 2 Nov 2005, 12:23 pm »

Will this speaker also have the rear firing ambience driver?

Arnold

RAW · « **Reply #6 on:** 2 Nov 2005, 02:05 pm »

No it will not.
On the the Apex will have the rear firing driver.
Designing the Apex center as large as it is we wanted a center channel to match the Apex.

trekker · « **Reply #7 on:** 2 Nov 2005, 02:30 pm »

Are there any user reviews of the Apex speakers? I saw this speaker on your website a while back, and it piqued my curiosity. Does the rear firing driver allow the speaker to cast a Boxless/3-D soundstage?

RAW · « **Reply #8 on:** 2 Nov 2005, 02:36 pm »

Yes we have a few out since the release of the Apex , but those who purchased are not people who post on the forums even though we asked for a review of them if they did not mind.

One person is a semi pro photographer and will be forwarding new pictures of his he had made.

klh · « **Reply #9 on:** 2 Nov 2005, 06:16 pm »

Sounds like a beast

! Do you think it would work as an LCR?

On a side note, if one wanted HT2s as surrounds, would it be possible to wall mount the speakers and have a downward firing port?

RAW · « **Reply #10 on:** 2 Nov 2005, 09:10 pm »

As for LCR using the Apex C well if you had to

Other than that another design coming as well.Time for that one will come soon

As for the HT2 rears down firing port yes you could, depending on port placement.

RAW · « **Reply #11 on:** 21 Nov 2005, 03:59 am »

Just updated the photos on the first post.
Measured designed and in the tweaking stage.

RAW · « **Reply #12 on:** 18 Feb 2006, 07:46 pm »

The final in room frequency response for the Apex C.