Members Gallery, Pictures of Salk speakers in members homes

intamin22 · « **Reply #100 on:** 21 Mar 2009, 04:42 pm »

Those are my dyed walnut songtowers. My listening environment is far from ideal as I'm in a very tiny bedroom in an on campus apartment. Fortunately I only have a few months left until the semester is over and then I'll be moving into a house for my senior year. Anyways, enjoy, and sorry for the lousy quality!

DarienJax · « **Reply #101 on:** 24 Mar 2009, 03:53 am »

Satin black SongTower RTs with silver aluminum baffles, and satin black SongCenter

Full gallery:

http://meikon.dnsalias.net:8080/gallery2/main.php/v/homes/rosewood/speakers/

audiocrazy · « **Reply #102 on:** 27 Mar 2009, 05:35 pm »

Here are my SongTowers in Honey Oak. They are tall & handsome

.

Zero · « **Reply #103 on:** 27 Mar 2009, 07:18 pm »

Well, I'm not really a member per-say, but I thought this thread would be appropriate to share a pic I took while I had the ST's in the house!

robinje · « **Reply #104 on:** 8 Apr 2009, 03:03 pm »

My Songtower RT's in my music room (a spare bedroom):

OgOgilby · « **Reply #105 on:** 2 May 2009, 12:32 pm »

Veracity HT2 TL, HT2 Sealed Center, Santos rosewood with satin finish.

n2siast · « **Reply #106 on:** 3 May 2009, 09:30 pm »

SongTower and SongCenter in black satin finish.

smwick · « **Reply #107 on:** 6 May 2009, 05:53 pm »

Zero, I noticed you have a pair of Totem Sttaf speakers in your photo. I also have the Sttafs. How would you compare them to the Songtowers? I am thinking of upgrading to the Songtowers.

Djohn · « **Reply #108 on:** 28 Jun 2009, 10:34 pm »

Song Towers QWT, Song Center, and SongSurround1 in Black Oak with grain visible and a satin lacquer top coat.

Not ideal for placement but tweaked now and they sound amazing for Home Theater.

At present I cannot improve on the width.

haw1144 · « **Reply #109 on:** 3 Jul 2009, 12:29 am »

How did you setup that shelf to hold the center? I've been wanting to put my center above my Pioneer Plasma... but haven't figured out quite how to do it.

Quote from: Djohn on 28 Jun 2009, 10:34 pm

Djohn · « **Reply #110 on:** 3 Jul 2009, 02:06 am »

I used two Real Organized 15" White Heavy Duty Brackets Item #: 48989 / Model: 25224PHLLG from Lowes. They come in white but I painted them black. These are very durable shelf brackets.

They are fastened to the studs. The black shelves were obtained from Home Depot and they are a Rubbermaid brand. I regret not installing three brackets due to the slight sag in the middle but the boards are screwed to the brackets underside so they are not going anywhere.

Jim Salk added two inserts for me at the back of the center so I could restrain it from falling hopefully. I used coated wire and looped it around each wall bracket and used aluminum crimp type ferrules to fasten the cable as a loop through the eye bolts in the center.

Hoping this helps.

Ace Deprave · « **Reply #111 on:** 3 Jul 2009, 02:57 pm »

Quote from: OgOgilby on 2 May 2009, 12:32 pm

Veracity HT2 TL, HT2 Sealed Center, Santos rosewood with satin finish.

Wow, those are really beautiful...and Ben Harper rocks too!

RadioWonder · « **Reply #112 on:** 25 Jul 2009, 01:58 pm »

Quote from: Djohn on 3 Jul 2009, 02:06 am

I used two Real Organized 15" White Heavy Duty Brackets Item #: 48989 / Model: 25224PHLLG from Lowes. They come in white but I painted them black. These are very durable shelf brackets.

They are fastened to the studs. The black shelves were obtained from Home Depot and they are a Rubbermaid brand. I regret not installing three brackets due to the slight sag in the middle but the boards are screwed to the brackets underside so they are not going anywhere.

Jim Salk added two inserts for me at the back of the center so I could restrain it from falling hopefully. I used coated wire and looped it around each wall bracket and used aluminum crimp type ferrules to fasten the cable as a loop through the eye bolts in the center.

Hoping this helps.

Thanks!
I have been debating between mounting my LCD display on the wall(raising LCD 9"(height of center channel) and putting the center channel speaker where the LCD used to sit.
Or using your method...

mr_bill · « **Reply #113 on:** 3 Aug 2009, 02:10 am »

Quote from: audiotom on 19 Jan 2009, 12:11 am

finally upgraded my system with photos on audiogon

http://forum.audiogon.com/cgi-bin/fr.pl?vevol&994629402&read

here's three classics 2006 salk 1961 Wurlitzer 1953 Kay Upright Bass

What finish are these HT3's?
Very nice.
Thanks,
Bill

jimdgoulding · « **Reply #114 on:** 3 Aug 2009, 02:32 am »

Quote from: justaudiomagic on 2 Dec 2008, 10:06 pm

Quote from: Jason Buccellato on 26 Feb 2006, 06:07 pm
Burled Walnut with a hand rubbed finish.

One word..... WOW !!

Boy, those ARE beautiful!

K Shep · « **Reply #115 on:** 4 Aug 2009, 05:01 pm »

Salk SongTower RT's in Medium Curly Cherry.

jbtrio · « **Reply #116 on:** 7 Sep 2009, 05:04 am »

HT-3s Burled Walnut with Claro Walnut baffles

funkmonkey · « **Reply #117 on:** 7 Sep 2009, 09:30 am »

jbtrio- nice speakers, and beautiful floor... what kind of wood is that? Looks great

jbtrio · « **Reply #118 on:** 8 Sep 2009, 12:07 am »

Hey Funkymonkey,
If your talking about the speakers, they are Burled Walnut veneer with Solid Claro Walnut baffles.
The floor is in the basement on a concrete slab. I couldn't use real wood. It is Armstrong laminated flooring.The color is exotic Noce Milan 4.72" beveled planks, even in person it looks like real wood.
Goes nice the walnut cabinets and rack.

Audiobudha · « **Reply #119 on:** 29 Sep 2009, 11:15 pm »

Quote from: jimdgoulding on 3 Aug 2009, 02:32 am

Quote from: justaudiomagic on 2 Dec 2008, 10:06 pm
Quote from: Jason Buccellato on 26 Feb 2006, 06:07 pm
Burled Walnut with a hand rubbed finish.

One word..... WOW !!
Boy, those ARE beautiful!

The burled Walnut is easily my favorite too. I love Walnut and the more highly figured the better. Those are simply stunning!