[Vhond]

Hi,

Does somebody know what kind of cable has been used for the connection between the MPS-1 power supply and preamp like a BP25?

It's some kind of DIN. Maybe somebody has schematics of this cable?

Thx in advance

[REDGUUZ]

Hi,

I recently looked at the opportunity to buy a good second hand BP25, so I also did some Research on the schematics.

Please find attached a schematic which shows the interior of the MPS-1 and the hookup of the 5 pin Din cable to the BP25.









 

[Vhond]

Thanks, the only content I could find on the net is https://www.canuckaudiomart.com/forum/viewtopic.php?f=9&t=38647&start=0

[Phil A]

I don't know the wiring diagram (have not looked) but there's thinks one can buy with that type of connector like -  https://www.monoprice.com/product?p_id=8533   or if one is into doing it themselves  -   https://www.parts-express.com/search?keywords=5%20pin%20din%20cable&order=relevance:desc

There are companies that make multi-conductor cables to make them with (e.g. Belden) which are sold by distributors of the products (e.g. Mouser, newark.com, allied wire and cable, etc.)

[REDGUUZ]

Hi,

If you search for "NAIM Power Supply Cable", you have a large choice (from "expensive but very well made" to "Cheap and Cheerful").

Up to you (and your pocket) to make the choice:

https://www.google.com/search?q=NAIM+5+pin+power+supply+cable&oq=NAIM+5+pin+power+supply+cable&aqs=chrome..69i57j33i160.16268j0j7&sourceid=chrome&ie=UTF-8

The complete schematic of the Bryston BP25 can be found on the Net (it was made public by Bryston, at the time).

http://bee.mif.pg.gda.pl/ciasteczkowypotwor/%23pro_audio/Bryston/BP25_SCHEMATICS.pdf

[Vhond]

I don't know the wiring diagram (have not looked) but there's thinks one can buy with that type of connector like -  https://www.monoprice.com/product?p_id=8533   or if one is into doing it themselves  -   https://www.parts-express.com/search?keywords=5%20pin%20din%20cable&order=relevance:desc

There are companies that make multi-conductor cables to make them with (e.g. Belden) which are sold by distributors of the products (e.g. Mouser, newark.com, allied wire and cable, etc.)

What I could find on the net the MPS-2 has a 6 pins plug, the MPS-1 a 5 pins plug, but is it has to be a specific (female plug):

It looks like they have used a kind of MIDI connector

[Vhond]

Hi,

If you search for "NAIM Power Supply Cable", you have a large choice (from "expensive but very well made" to "Cheap and Cheerful").

Up to you (and your pocket) to make the choice:

https://www.google.com/search?q=NAIM+5+pin+power+supply+cable&oq=NAIM+5+pin+power+supply+cable&aqs=chrome..69i57j33i160.16268j0j7&sourceid=chrome&ie=UTF-8

The complete schematic of the Bryston BP25 can be found on the Net (it was made public by Bryston, at the time).

http://bee.mif.pg.gda.pl/ciasteczkowypotwor/%23pro_audio/Bryston/BP25_SCHEMATICS.pdf

Naim seems to be all male

[REDGUUZ]

Hi Vhond,

Sorry,  Reference to a NAIM cable was indeed not correct.
Apologies for setting you on the wrong foot

Your photo shows a "regular" 5 pin DIN Female Plug
https://nl.rs-online.com/web/p/din-connectors/2818998?cm_mmc=NL-PLA-DS3A-_-google-_-CSS_NL_NL_Pmax_0226-_--_-2818998&matchtype=&&gclsrc=aw.ds&gad_source=1&gad_campaignid=23562600430&gclid=Cj0KCQiAqeDMBhDcARIsAJEbU9ST3KbqMB06bWMZij4l8tyyEdLIoeynHrPd_II9DQSv0YnDNlH2RMUaAhyFEALw_wcB

-  A local competent technician can fabricate a suitable Bryston MPS1 <--> BP25 Power Supply Cable, as also stated previously by others.
-  Also, there are commercial companies who provide this service.

The BP25/MPS-1 schematic provided earlier shows the required hookup.

http://bee.mif.pg.gda.pl/ciasteczkowypotwor/%23pro_audio/Bryston/BP25_SCHEMATICS.pdf

Pin 1 = +  24V DC               RED WIRE
Pin 2 = 0V   / Earth chassis   WHITE WIRE
Pin 3 = - 24V DC                 BLACK WIRE
Pin 4 =  Power Up                           GREEN WIRE
Pin 5 =  Not Used