Nuprime HD-ava crossover setup

0 Members and 1 Guest are viewing this topic. Read 877 times.

jymy

  • Jr. Member
  • Posts: 12
Nuprime HD-ava crossover setup
« on: 7 Oct 2025, 05:33 am »
Hello,

Still holding on to my Nuprime HD-AVA and using it mainly for music in 2ch, really enjoying it. But have now "invested" in 2 subwoofers for little bit more punch in movies but dont get the crossover to work. Front speakers are set to small 80hz, and subwoofer crossover at 80 hz, but when i test them with REW and unik mic fronts play all sounds from subwoofer territory and up, and subwoofers play far over the 80hz they are set to. If i set front speakers to large then the only differens is that they play lower hz much louder. is there something i am missing? When doing calibrations with rew i use a usb cabel, can that be the problem? maby the usb dac dont take crossover changes?

rustydoglim

Re: Nuprime HD-ava crossover setup
« Reply #1 on: 8 Oct 2025, 08:15 pm »
How about considering upgrading to all digital system with AoIP.
Replace the AVP with Nuprime-X H16-AIP (https://nuprime-x.com/product/h16aip/)
You can then send the Dolby Atmos decoded AoIP to computer's Dante Virtual Sound Card and use DSP for processing. You can also send the LFE channel to each sub woofer separately via AoIP to XLR converter.
Keep the HD-AVA for the 2 channel. May be add active speaker for 4.1 setup.

You can buy other brand's AoIP to XLR converter or wait until Jan 2026 for Nuprime-X AoIP to XLR converter.



jymy

  • Jr. Member
  • Posts: 12
Re: Nuprime HD-ava crossover setup
« Reply #2 on: 20 Oct 2025, 05:40 am »
Thank you, will look into that.  :)

jymy

  • Jr. Member
  • Posts: 12
Re: Nuprime HD-ava crossover setup
« Reply #3 on: Today at 09:55 am »
I found that if you use a usb kabel and connect it to the dac in the nuprime hd ava the crossover does not make a difference. I tryed another dac and connected to coax input on the hd ava and now the crossover works. So now i can use subwoofers the right way.

rustydoglim

Re: Nuprime HD-ava crossover setup
« Reply #4 on: Today at 10:52 am »
The USB input on HD-AVA act as a standalone stereo DAC.  HD-AVA is literally two products in one box for user to switch between stereo integrated amp and home theater AVP.
"When USB Input is the selected source, the USB DAC outputs appear on 7.1 L&R RCA and XLR outputs, in addition to USB DAC L&R outputs." Other channels will not have signals when input is from USB.

jymy

  • Jr. Member
  • Posts: 12
Re: Nuprime HD-ava crossover setup
« Reply #5 on: Today at 11:24 am »
thank you for the clarification. Really enjoy the sound in Nuprime products, and really like hd ava, but its a bit tricky sometimes.