DVA M225 and Aerial 7T Speakers

0 Members and 1 Guest are viewing this topic. Read 47 times.

fourxmotion

  • Jr. Member
  • Posts: 2
DVA M225 and Aerial 7T Speakers
« on: 10 Jul 2025, 02:28 pm »
Hello

I have an interest in a pair of DVA M225s to go with my Aerial 7T speakers. My concern is the compatibility with their impedance.  Here is what Stereophile said when they did the measurements:

“ My estimate of the Aerial Acoustics Model 7T's B-weighted sensitivity on its tweeter axis was 86.6dB/2.83V/m—significantly lower than the specified 89dB. The electrical impedance remains between 4 and 8 ohms over much of the audioband (fig.1), but drops to 3.5 ohms in the upper bass and low treble, and to 3 ohms in the low bass. Although the electrical phase angle remains low at almost all frequencies, this speaker will work best with a good amplifier rated at 4 ohms.”

Will the DVA 225s work well with my speakers?

Thank you