[NXSTUDIO-DRUMMER]

I would argue that the market for DIY is much smaller than that for plug and play. For evidence of this just look at the number of players in either segment of the market. I think the real challenge for GRR is marketing a finished product after successfully advocating DIY for all these years. Were it me, and my intentions were to expand market share, I'd look at launching a different brand or company altogether and not market it alongside the DIY products. They dilute each other.  As an example, think Toyota and Lexus.
The sad part is that the whole audio market is changing, and the "audio systems" of the past are no longer aspired to in the way they were 10 or 20 years ago. It seems to me that the market has become niches within a shrinking whole.

Personally, I would like to see it offered in kit form. To pay additional cost for someone else to build the speaker, that I'm perfectly capable of building, lets the wind out of my sails.  Plus, I'd rather add my own personal touch to the build as well. Peter you address some valid points.

On the other hand, the individuals who don't have fabricating skills, a turnkey finished set of speakers will meet your requirement, at a additional  cost. Since you'll have to pay for someone's time to build it for you. (Which is fair, needless to say)

[Early B.]

Personally, I would like to see it offered in kit form. To pay additional cost for someone else to build the speaker, that I'm perfectly capable of building, lets the wind out of my sails.  Plus, I'd rather add my own personal touch to the build as well. Peter you address some valid points.

On the other hand, the individuals who don't have fabricating skills, a turnkey finished set of speakers will meet your requirement, at a additional  cost. Since you'll have to pay for someone's time to build it for you. (Which is fair, needless to say)

From a marketing perspective, does offering both options (kit & finished) limit the sales of the finished product? Audio Note and Pass Labs use separate companies for kits and finished products. I suppose they do that because the markets are completely different. 

[toocool4]

Personally, I would like to see it offered in kit form. 

Danny already said the speakers will only be available fully assembled, so if you want DIY on this one, I think you are out of luck.

[BrandonB]

Is Danny going to be streaming online tonight talking about the new speaker with Ron?

[jmimac351]

.
Current plan is Thursday evening (Jan 30th) on the NewRecordDay YT channel.
https://www.youtube.com/@Newrecordday2013

I had trouble with the link above, I think because of the "@".

This link worked: https://www.youtube.com/Newrecordday2013

"Hey, Watch This!"... this might be a link to the Live Stream:  https://www.youtube.com/live/DiiTgmIAs-8?si=VAddFrsd_Buce_Rt

[Danny Richie]

We did do a live stream tonight and we answered a LOT of questions.

[PumaCat]

Your livestream tonight was really excellent. Helpful and informative.

Thanks for taking the time to do the livestream.

Cheers,
Stephen (aka Vfrider on the chat tonight).

[Hobbsmeerkat]

Here's the livestream for those that missed it:
https://www.youtube.com/live/QLvNY_FMasQ?si=A7Fm9o7Paio5ulGS

[dvdkitch]

The live stream was very helpful and probably save a 30 minute phone conversation.

[BrandonB]

The live stream was very helpful and probably save a 30 minute phone conversation.

When will we get to see the measurements of the NRD speakers?

[Hobbsmeerkat]

Once we get a little bit closer to launch.
We're having the crossover boards designed & made now, cabinets are in production.

I think eta for launch is looking to be around April if all continues goes smoothly.

[BrandonB]

Once we get a little bit closer to launch.
We're having the crossover boards designed & made now, cabinets are in production.

I think eta for launch is looking to be around April if all continues goes smoothly.

Will someone be building the speakers here or are they going to be manufactured and shipped to you guys.  Will people be able to request upgraded crossovers?

[Hobbsmeerkat]

Cabinets will be shipped to us, but crossover assembly, final assembly & testing will all be done in the US.

There wont be any options for upgrades as we will already be using the best parts we can for the application, and there's not really any room inside the speaker for much else, the crossover takes up the entire bottom of the speaker.
That wont stop a customer from swapping out parts if they want to, but the space is quite tight.

[duff138]

Is there a minimum size room you'd recommend using these speakers in?  My room is roughly 11' x 11'.  Current speakers are sitting 4' out from back wall.  I just want to know whether these would be the right option for a smaller room, or should I look at something different.

[jmimac351]

Is there a minimum size room you'd recommend using these speakers in?  My room is roughly 11' x 11'.  Current speakers are sitting 4' out from back wall.  I just want to know whether these would be the right option for a smaller room, or should I look at something different.

Notwithstanding the answer to your question, something I've done is create a video via a private link that can be sent, and only those people with the link can view it.  The purpose was to show the room as that really helps people think about what's going on much more easily, and give better advice.   

If you do it, make it so it's like they are walking / looking around the room and narrate with concerns / questions / issues.