Sonicjoy's NX Studio build. With photos.

0 Members and 1 Guest are viewing this topic. Read 18170 times.

mikeeastman

Re: Sonicjoy's NX Studio build. With photos.
« Reply #240 on: 4 Sep 2020, 10:36 pm »
I just did dry run on the no-rez and Sonicjoys lay out might work for him but they didn't work with the flat pack.

mikeeastman

Re: Sonicjoy's NX Studio build. With photos.
« Reply #241 on: 5 Sep 2020, 12:53 am »
Here is the way I laid it out the No-rez, I had the luxury of 2 extra 12"x12" pieces of no-rez so I didn't have to piece any of it together. I also did a layout with out the extra pieces, you will have to piece the 2 back pieces in this layout with just enough left over to fill in around x-over.






 Here is a pic of the template for the top sides I used, I added the little bump out to fill the space in front of the brace on the final layout.


mikeeastman

Re: Sonicjoy's NX Studio build. With photos.
« Reply #242 on: 21 Sep 2020, 04:23 pm »
Started on cross-overs first one soldered but not glue to board yet, though I'd check make sure all looks good.

Boy this is a heavy cross-over nearly 11lb with the wood plank it's mounted on.



Hobbsmeerkat

  • Full Member
  • Posts: 694
Re: Sonicjoy's NX Studio build. With photos.
« Reply #243 on: 21 Sep 2020, 04:51 pm »
I cant get over the size of that copper cap...  :lol:
Im guessing this is going to be an external crossover?

hawkeyejw

Re: Sonicjoy's NX Studio build. With photos.
« Reply #244 on: 21 Sep 2020, 05:04 pm »
Started on cross-overs first one soldered but not glue to board yet, though I'd check make sure all looks good.

Boy this is a heavy cross-over nearly 11lb with the wood plank it's mounted on.



Gloriously over the top!  :lol:

Thanks for sharing the process with us, looking forward to seeing the results and reading about how they sound.

rollo

  • Industry Participant
  • Posts: 5009
  • Rollo Audio Consulting -
Re: Sonicjoy's NX Studio build. With photos.
« Reply #245 on: 21 Sep 2020, 05:37 pm »
Started on cross-overs first one soldered but not glue to board yet, though I'd check make sure all looks good.

Boy this is a heavy cross-over nearly 11lb with the wood plank it's mounted on.




  Sweet Mike.

charles

mikeeastman

Re: Sonicjoy's NX Studio build. With photos.
« Reply #246 on: 22 Sep 2020, 01:18 pm »
So, no one spotted that the big cap was backwards, realized it when I assembled second cross-over.  :duh:

Argoncat

  • Jr. Member
  • Posts: 30
Re: Sonicjoy's NX Studio build. With photos.
« Reply #247 on: 22 Sep 2020, 04:41 pm »
Backwards??  I only thought electrolytic capacitors had polarity.