BR-4 Instructions

0 Members and 1 Guest are viewing this topic. Read 204 times.

gberger

  • Jr. Member
  • Posts: 208
  • Check 6
BR-4 Instructions
« on: 28 Jul 2020, 02:29 am »
Is there a manual or set of instruction sheets to go with the new BR-4 remote control?

James Tanner

  • Facilitator
  • Posts: 18441
  • The Demo is Everything!
    • http://www.bryston.com
Re: BR-4 Instructions
« Reply #1 on: 28 Jul 2020, 11:26 am »
Is there a manual or set of instruction sheets to go with the new BR-4 remote control?

Not sure on that - Mike would know - mpickett@bryston.com

Here's what I have:

Here's some BR4 Firmware Notes:

---------------------- Reset to factory default --------------------------
Press 'CODE' for 5 seconds, until LED blinks.
Release 'CODE' button.
Press '795', LED will blink 4 times.

;---------------------- Volume Function -----------------------------------
By default, the volume buttons control the programmed pre-amp even when that mode is not selected.

To use the BDA3.14 volume control:
Press 'CODE' for 5 seconds, until LED blinks.
Release 'CODE' button.
Press '717', LED will blink 2 times.

Press 'CODE' for 5 seconds, until LED blinks.
Release 'CODE' button.
Press '750', LED will blink 2 times

To use the pre-amp volume control:
Press 'CODE' for 5 seconds, until LED blinks.
Release 'CODE' button.
Press '751', LED will blink 2 times

---------------------- Device codes --------------------------------------
Device codes for Volume/Mute functions
710 0000 Not assigned
711 0001 SP1.7/SP2
712 0010 B100/BP16/BP17
713 0011 Not assigned
714 0100 Not assigned
715 0101 BCD1, BCD3
716 0110 BDA1, BDA2 *** NO VOLUME CONTROL ***
717 0111 BDA3, uses device ID 6
718 1000 Not assigned
719 1001 BDP3, uses device ID 9
720 1010 Not assigned
721 1011 BP25/BP26
722 1100 B60/BP6
723 1101 Not assigned
724 1110 Not assigned
725 1111 Not assigned
750 - Select D/A to use the BDA3.14 volume control.
Select Preamp to use the preamp volume control.
751 - Preamp volume control is used in either D/A or Preamp mode.


james

gberger

  • Jr. Member
  • Posts: 208
  • Check 6
Re: BR-4 Instructions
« Reply #2 on: 28 Jul 2020, 01:16 pm »
James

Wow!    Thank You!

I bought two of them several months ago for the volume on my BP17C, and to possibly control my BCD -3. I received another one with a B60R for my Grandson's system.

Thanks Again,

George

.

bokko

  • Jr. Member
  • Posts: 40
    • My Photography
Re: BR-4 Instructions
« Reply #3 on: 29 Jul 2020, 02:15 pm »
Good Day:

I would also like to see the instructions and a chart of what the remote is compatible with.
Similar to way BR2 is presented on website.

Thanks