These little monitors should have their own thread so here we go.
We are still needing a name for the little Neo3/Neo 10 Ob monitor which will be a member of the Serenity line.. There's been a few suggestions such as "The Deuce", "The Super 2" and a couple of others which I can't recall at the moment, feel free to post them again folks.
The use a single GR Neo 3 and Neo 10, both in waveguides they stand 16" tall and are approx 15" deep. The response is exellent with a -6db point around the 180Hz range.
With a 2nd order network:
And for the first time with these drivers, a first order network:
There is also an optional OB triple stack of the M165-16 woofers that can be used as a base . This stack of M165's will extend the range of the monitors down to the 60-80Hz range depending on room gain making crossing to pair of servo subs even easier. If there's interest in these, we'll do a small run.
Everything in the above kts is made from 1", .75" and .625" Medex.
A number of the flat packs and a finished pair of cabinets for Rich have gone out. We'll need to soon cut more of these as the initial run is getting depleted.
A couple pics of the assembled flat packs and of the finished cabs sent to Rich.
jay
