New Felix Power Line Conditioner “FO-Felix”

WireNut · « **Reply #20 on:** 5 May 2018, 11:00 pm »

What's delivery look like on the boards to the US?

Thanks.

Folsom · « **Reply #21 on:** 6 May 2018, 04:04 am »

USPS priority means next week.

undertowogt1 · « **Reply #22 on:** 6 May 2018, 12:13 pm »

Hi Flosom,

Not sure if this was covered in another thread but a few questions
- I built your Folsom Chip Amp, would the Felix work well inline inside this amp.

- does this board come with a recommended parts list like you chip amp so I can just order off mouser.

- Approximately how much for parts and board

Thanks in advance

Folsom · « **Reply #23 on:** 6 May 2018, 05:33 pm »

It can be used with the amp no problem. I do include a parts list. Digikey is easier for a one stop shop because mouser sold out of a few things, at least for the moment. So yes you can do a one stop shop. Parts on top of the $13 for the board+terminals is $14-16 depending on X cap selection.

Folsom · « **Reply #24 on:** 19 May 2018, 07:35 pm »

Incase anyone missed round #1, round #2 is up

Folsom · « **Reply #25 on:** 11 Jul 2018, 09:43 pm »

GB# 3 is going on.

There's an enclosure included that will make it MUCH easier for most people.

WireNut · « **Reply #26 on:** 11 Jul 2018, 10:52 pm »

Quote from: Folsom on 11 Jul 2018, 09:43 pm

GB# 3 is going on.

There's an enclosure included that will make it MUCH easier for most people.

MttBsh · « **Reply #27 on:** 12 Jul 2018, 12:42 am »

I've had a little difficulty finding information about this Fo-Felix Power Line Conditioner, there are lots of micro-technical details shared here but nothing that tells me what this thing looks like or how it is used.

You mention that it is a board with an enclosure... would it be considered a stand-alone conditioner (like, for example, the PS Audio Uberbuss) that has outlets that one can plug audio components into? I'm looking for a good quality conditioner to plug my DAC, preamp and amp into and would be interested in knowing if the Fo-Felix would be a good solution. Thanks for any "big picture" info you can share.

Folsom · « **Reply #28 on:** 12 Jul 2018, 02:28 am »

It is a DIY project.

http://www.diyaudio.com/forums/group-buys/322882-gb-round-2-fo-felix-emi-filter-ac-mains-120-230v-folsom.html

MttBsh · « **Reply #29 on:** 12 Jul 2018, 04:09 am »

Yes, unfortunately I have three left thumbs

!

Just curious if selling assembled units is allowed. There are a lot of audiophiles like me who have zero DIY skills.

Folsom · « **Reply #30 on:** 12 Jul 2018, 07:33 am »

You can PM me about that.

Folsom · « **Reply #31 on:** 19 Dec 2018, 01:53 am »

Example pictures of what can be made:

WireNut · « **Reply #32 on:** 24 Mar 2019, 03:24 pm »

Just a heads up. Group buy #4 for the Fo-Felix pcb's is on at DIYaudio.

Link:
https://www.diyaudio.com/forums/group-buys/335200-gb-round-4-fo-felix-gb-1-ac-receptacle-enclosure.html

MHL · « **Reply #33 on:** 24 Mar 2019, 04:30 pm »

Quote from: Folsom on 19 Dec 2018, 01:53 am

Example pictures of what can be made:

How much for the case in the photo? I have three boards from a previous GB.

Thanks

Folsom · « **Reply #34 on:** 24 Mar 2019, 09:49 pm »

Check the link. The problem is the GB has never happened.

undertowogt1 · « **Reply #35 on:** 19 Apr 2019, 08:59 pm »

Hi All, Its me , the DIY guy who knows nothing about electronics

. I bought 4 Fo Felix boards and Folsom sent me the parts list. It kind of looks like another language to me so I need some translation.

CMC - Common Mode Choke ( I figure that one out)
What is a Comoco and Bourn? are these brand names?

I will hopefully be making this power conditioner for the following

Folsoms Chip amp,
a bottlehead Reduction Phono Preamp,
My laptop
a record player.
I have a passive preamp / TVC
and a small 6N11 tube preamp

I will have 4 boards, So should I pick a CMC for the amp and also CMC for my sources / preamp?

I assume all of these do not draw much current but I do not know what CMC to use, but I want to be sure. Am I correct in choosing the P3717-A - 3A 90W/180W.

Audio Circle is always very helpful and with a little help I can get through this. If I can do this without burning my house down...anyone can.
Thanks in advance

Folsom · « **Reply #36 on:** 19 Apr 2019, 09:17 pm »

I would greatly appreciate a PM instead of posting those values...

undertowogt1 · « **Reply #37 on:** 19 Apr 2019, 11:09 pm »

Quote from: Folsom on 19 Apr 2019, 09:17 pm

I would greatly appreciate a PM instead of posting those values...

Deleted, truly sorry about that

Folsom · « **Reply #38 on:** 20 Apr 2019, 01:47 am »

PM sent, don't be afraid to ask all the questions you need.

WireNut · « **Reply #39 on:** 27 Apr 2019, 10:48 pm »

Hi Jeremy,

I just happened to run across a picture of your Fo-Felix and enclosure showing how you stacked 6 boards to 3 outlets + an unfiltered outlet.
I love this. Stacking the Fo-Felix is a great idea if an enclosure is tall enough.

I may have missed the photo on other threads, or may have just over looked it, but I love the idea.
Damn, I might have to modify or build a new enclosure for my Fo-Felix.

The photo I've uploaded is the only photo I know of that shows a good image of how you stacked your Fo-Felix in a single enclosure

.