OB H/W Frame Wiring Info / Diagrams

0 Members and 1 Guest are viewing this topic. Read 6329 times.

Captainhemo

Re: OB H/W Frame Wiring Info / Diagrams
« Reply #20 on: 6 Apr 2020, 06:30 pm »
there are other   stickies that were started by    members.....

Danny Richie

  • Facilitator
  • Posts: 13212
    • http://www.gr-research.com
Re: OB H/W Frame Wiring Info / Diagrams
« Reply #21 on: 8 Apr 2020, 01:15 pm »
there are other   stickies that were started by    members.....

Okay, I figured it out.

mlundy57

Re: OB H/W Frame Wiring Info / Diagrams
« Reply #22 on: 8 Apr 2020, 01:50 pm »
Thanks, that’s going to be a big help to a lot of folks

Captainhemo

Re: OB H/W Frame Wiring Info / Diagrams
« Reply #23 on: 8 Apr 2020, 03:50 pm »
Okay, I figured it out.

Thanks bud

jay

Metfit77@gmail.com

  • Jr. Member
  • Posts: 24
Re: OB H/W Frame Wiring Info / Diagrams
« Reply #24 on: 1 Jun 2020, 09:38 pm »
Hello, I am hoping someone can help me. I am hooking up a dual ob sub, but as opposed to the drawing, my top woofer is backward facing and the bottom is front facing. The driver coil section is fairly straightforward, but I'm confused as to how to wire the servo section.
Do I go servo amp (red) to red (bottom front facing), black (bottom) to red (top rear facing woofer), black to amp (black) ?
Or
Red (from amp) to Red (bottom), Black (bottom) to Black (top) , Red (top) to black from amp ?


Thanks in advance for your help.
« Last Edit: 2 Jun 2020, 02:02 pm by Metfit77@gmail.com »

Danny Richie

  • Facilitator
  • Posts: 13212
    • http://www.gr-research.com
Re: OB H/W Frame Wiring Info / Diagrams
« Reply #25 on: 2 Jun 2020, 02:00 pm »
Hello, I am hoping someone can help me. I am hooking up a dual ob sub, but as opposed to the drawing, my top woofer is backward facing and the bottom is front facing. The driver coil section is fairly straightforward, but I'm confused as to how to wire the servo section.
Do I go servo amp (red) to red, black to red (top rear facing woofer), black to amp (black) ?
Thanks in advance for your help.

It's not that bad. If you flip a woofer then flip the polarity on both coils.

Metfit77@gmail.com

  • Jr. Member
  • Posts: 24
Re: OB H/W Frame Wiring Info / Diagrams
« Reply #26 on: 2 Jun 2020, 02:03 pm »
Thanks

Captainhemo

Re: OB H/W Frame Wiring Info / Diagrams
« Reply #27 on: 5 Jun 2020, 05:18 pm »
First example on  first post of this   thread.   There is a  drawing of the terminals/wiring there as well.

"DUALS WITH  OPPOSED WOOFER (one forward, one  backward)

Driver Coils
Big red lead from  A370 to lower (backward) woofer - driver coil, then from there to upper (forward) woofer + driver coil.
Big black lead from amp to  lower (backward) woofer + driver coil, then from there to  upper (forward) woofer - driver coil.
Driver coil wiring done.

Servo Coils
Small red wire from amp to  lower  (backward) woofer - servo coil.
Run a wire from the lower (backward) woofer + servo coil  to the  upper (forward) woofer + servo coil
Finally, run the  small black wire from the amp to the upper (forward)  woofer - servo coil.
Servo coils  done.



"

jay

bonsiguy

  • Jr. Member
  • Posts: 7
Re: OB H/W Frame Wiring Info / Diagrams
« Reply #28 on: 4 Jul 2020, 12:07 am »
hi all   getting my stuff together to put a set of the duel subs together . wondering what is the best wire to use for these subs ? and i assume the run from the plate amp should be as short as possible . and what gauge is the best for them also. thanks all hope to post some pics when i get started.    mark 

mlundy57

Re: OB H/W Frame Wiring Info / Diagrams
« Reply #29 on: 4 Jul 2020, 04:27 am »
hi all   getting my stuff together to put a set of the duel subs together . wondering what is the best wire to use for these subs ? and i assume the run from the plate amp should be as short as possible . and what gauge is the best for them also. thanks all hope to post some pics when i get started.    mark

The wires from the amps are already connected to the amps. Ideally you want to connect these to the speaker. When You order the kit(s) you can get Danny's 16ga hookup wire and 4 pole Neutrik connectors. The female connectors goe on the speakers and the male connectors go on the amp wires.